Best Alloy Manufacturers in China

Guangzhou Kingmetal Steel Industry Co., Ltd., is an Industry Group Company. It is a professional company in designing, producing and selling steel pipe, pipefittings and prefabricated house. We have our own big factories with modern machine line to make high quality products, which is mainly to be exported to oversea markets.

We have two factories. One is located in Wenzhou city, it was established in 1989. This factory is a leading seamless stainless steel pipe and pipefitting manufacturer in China. It occupied 114, 000 square meters, with fixed capital over 200 million and total amount 300 million. It owns 500 staffs including 80 advanced engineers. It owns perfect management system, vigorous technology supports, advanced production equipment and completed inspection equipment. The factory pay highly attention to enterprise foundation establishment, successfully was approved the authentication of PED and AD by TUV from German company, and the national special equipment license. Our products greatly provide for petroleum chemical, metallurgy, pharmaceutical machinery, paper making, food, shipbuilding, environmental protection, boiler, heater exchanger, pressure container, condensation, water, electricity and so on. The mainly grades we can provide are 304, 304L, 316, 316L, 321, 321H, 317L, 310S, 347H, 31803 etc.

Another factory is located in Guangzhou city, it was established in 2002. This factory is one of the largest prefab house corporation in southern China. It occupied 30, 000 square meters, with fixed capital over 40 million and total amount 100 million. It owns 200 staffs. Annual out put is more than 2 million square meter, and there have a stock of about 50 thousand square meter. These products include slope top prefab house, flat top prefab house, non-standard steel structure (warehouse, industrial shed), container house, mobile fence wall, sentry box etc. Our goods not only sold to domestic market but also extended to Southeast Asia, Middle East, Europe, Australia, Africa, and South America etc.

At the same time, we also are the agency of Bao Steel, Hengyang, Tianjin, Anshan, Pangang etc. Big group steel company. We offer the seamless carbon, welded carbon steel pipe, GI pipe, and special pipe. Fittings elbow, tee, reducer, cap, lap joint, flanges etc...This is better for our customer to buy the different products from China, while they are saving their time, but they can enjoy in our best serves.

We have advanced technology of management, we win the trust because of our good quality.

We have clannish conscientious and passionate salesman, we gladden and steady the customers with our best service.

We are pure-hearted and awaiting for your kind attention to our company.

Our company is the professional manufacturer and exporter for carbon and graphite products. Our company was established at 2000. Our factory is located in Beijing city. And 50 kilometers from Beijing airport.

We mainly produse graphite rod, graphite block, graphi. Te crucible, graphite mould, graphite bearing, graphite felt, carbon fiber cloth, etc.

Make it according to drawing and specifications.

For the graphite, We have mold graphite, isostatic graphite, extruded graphite, vibration graphite. Bulk density from 1.6g/cm3 to 1.91g/cm3.

Carbon-graphite products for electron and semiconductor industry

Carbon-graphite products for application of processing by industrial furnace under high temperature; --

Carbon-graphite products for sintering mold of diamond tools

Carbon-graphite products for non-ferrous metallurgy and processing;

Carbon-graphite products for mechanical industry;

Carbon-graphite products for high-tech field

Carbon-graphite products for EDM

Carbon-graphite products for aviation and aerospace industry

We believe that duo to our high quality graphite material and formed graphite parts at very competitive prices with professional service, broad product knowledge and technical expertise can help you save much resource and improve your efficiency, and satisfy more of your customers' needs.

Luoyang TongchangTungsten & Molybdenum Material Co., Ltd. Locates in Luoyang, based on its abundant resources, is professionally manufacturing & trading Tungsten, Molybdenum and their alloy Products.

Main products:

1. Molybdenum products:

(1) Pure molybdenum products: Molybdenum wire, rod(electrode), plate, crucible/boat, funnel and other custom special shape molybdenum products, etc.

(3) Molybdenum alloy products: MLa plate, MLa rods, TZM plate, wire and other molybdenum alloy products.

2. Tungsten products:

(1) Pure tungsten products: Tungsten wire, slab, bars, plate/sheet, rod(electrode), crucible/boat, funnel and other custom special shape, etc.

(2) Tungsten alloy products: Alloy wire, alloy rod(electrode), alloy crucible, and other special shape tungsten alloy etc.

3. Alloy products:

(1) Tungsten-copper alloy, silver-tungsten alloy, molybdenum-copper alloy, molybdenum-tungsten alloy etc.

(2)Tungsten nickel copper alloy and tungsten nickel iron alloy etc.

(3) Tungsten electrode: WL, WCe, WT, WP and so on.

With the stable and high-quality, our products sell well in domestic and foreign markets and have gained unanimous trust and favorable comments from large customers. Dear friend, welcome your visit, let's create a brilliant future together.

Foshan Nanhai Dynamax Industry Engineering Co., Ltd was established in 2006. She is one of China's pioneer supplies of aluminum extrusion equipment. She specialized in manufacture single billet heating furnace, multi-billet furnace, hot log shear, single puller, double puller, extrusion handling system, cooling table, aging furnace, online quenching system, extrusion die oven and so on.

Dynamax good quality and excellent service gains a big market both in and out. Many brand name extrusion companies choose us, cooperate with us will bring you energy saving, high capacity!

We located in Foshan, nearby Guangzhou, 35 minutes can pick you up from Guangzhou airport.

Our main market is in Southeast Asia, Middle East, Estern European, South America, Africa and so on. Dynamax not only offer your aluminum extrusion machines but also can offer your a new workshop design and offer all the machines installation.

During the mechanical and electrical engineers installation peroid, our engineers will teach your workers how to operation the machines and how to maintenance the machines.

Before you buy the machines, buy some spare parts, its better for you running a new factory.

Don't worry about the new factory, we offer the key to you. We can make sure everything you can running smoothly!

ATM Material Co., Ltd was mainly initiated by China Iron & Steel Research Institute Group (CISRI). CISRI is a Chinese state-owned enterprise incorporated by former Central Iron & Steel Research Institute of China and former Automation Research Institute of China.

For the last 60 years, CISRI is serving as an important R&D base and a leading provider of advanced materials and products in China. CISRI owns a broad spectrum of technical know-how and advanced products in various industrial fields such as functional materials, powder metallurgy materials, refractory metals, high temperature alloys and structural materials.

CISRI owns 8 production bases and more than twenty production lines all over China. We have China' S largest amorphous and nanocrystalline alloy production base, China' S largest flux-cored welding wire production base, China' S largest export-oriented production base of diamond blades, China' S first-class production facility for high temperature alloys and products, ect.

With 12 holding companies and 12 national centers and institutions, CISRI also serves as the innovation base for key technology in metallurgical industry, and the authoritative agency for metallurgical analysis and test.

Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.

Our main products are silicon metal lumps (97%/553/441/421/411/4105/3303/2202/

1101. etc. ), silicon metal powder (1μ M~10mm), Our products can be applied in the industries regarding chemical, metallurgy, electron, optics, building material, mechanism, fireproof materials etc.

Our affiliate factory located at silicon metal production base in Yunnan province. The raw-materials are enough and have good quality. We own advanced production equipment, consummate art and technology, standardized laboratory and advanced analysis and test instrument.

We are certified by ISO9001: 2015 quality system, advanced management systems and systemic quality control system make competitive products. Senior technical force, perfect after-sales service, we have a high reputation in the users at home and abroad.

We have the right to import and export, our Silicon and Mn products are famous in the world.

Geared to the demand of the new century, Our Factory is striving itself continuously for developing silicon series products and Mn series products, nurturing and strengthening the enterprises' core competition constantly, opening up international markets besides of domestic actively and working hardly for an internationalized and specialized enterprises.

Baoji Tuohang Precision Manufacturing Co, td. Is located in Baoji City, Shaanxi Province high-end equipment industrial Park B, cblock, the existing modern production plant 6000 square meters, all kinds of production equipment 50 sets, since its establishment adhering to the concept of "quality as the basis, lean as the means, high-quality as the goal, to create high-end processing brand"the company layout titanium and titanium alloy materials and multi-axis CNC machining field, Has passed the weapons andequipment quality management system certification, national high-tech enterprise certification, national military standard GJ890011: 2017, national standard GB/T19001: 2016, quality system 1s09001: 2015, aerospace As9100 system certification. Won the youth model enterprise, shaanxi Province quality brand excellent enterprise, AAA level bidding credit enterprise and other honorsis committed to achieve precision manufacturing benchmark, cast a hundred years ofTuohang brand.
Innovation is the soul, Tuo Hang precision focus on the forefront of science and technology, the introduction of Switzerland Gfcompany's Micron high-precision five-axis machining center, as well as a number of four-axis machining centers, three-axismachining centers, can achieve large size, special-shaped pats of multi-axis precision miling processing. In addition, the company also has dozens of high-precision CNC turning centers, which can realize the precision turning of shaft and disk parts. Cuttingequipment includes four-axis water cutting, shearing machine, sawing machine, etc. There are deep hole drilling, slow wire
Centerless lathe, polishing machine and other equipment to cooperate with the use of turning, miling, planing, grinding, pliers full process, At the same time, the company purchased three coordinate measuring machine, ultrasonic flaw detector, spectrometerhardness tester and other high-end testing equipment, and cooperated with the machining center to provide a platform for the processing and testing of different specifications of precision parts.
All the way forward, Tuohang Precision has established a professional team with more than 50 engineers andtechnicians of various types and more than 8 years in the machining industry, which can provide customers with comprehensiveinteqrated and personalized first-class services.

Baoji Qicheng Non-Ferrous Metals Co., Ltd is located in Baoji, Shaanxi Province, China. Ls specialized in titaniumand titanium alloys and other rare metal materials development, production, sales as one of the comprehensiveenterprises. The company mainly produces a series of products such as titanium plates, titanium bar, titaniumforgings, titanium wire, titanium zero cutting and titanium workpiece. Products are widely used in aerospace, shipsmilitary, petroleum, chemical, metallurgical, electric power, pharmaceutical, Marine engineering and sporting goodsand many other fields.
The company's products can meet the American standards, national military standards, national standards, andother industry advanced standards. Stock spot titanium plates, titanium rods, titanium forgings and other materialsthousands oftons, The production plant and finished material warehouse of about 6000 square meters, the companycurrently has R & D department, technology department, production department, Marketing Department, qualityinspection department, human resources department, etc, Among them, there are two senior R & D personnel, tenprofessional and technical personnel, and more than thirty skilled production workers. The company relies on thestrong comprehensive strength of "China Titanium City" for efficient resource sharing, with unique geographical, material and scientific research advantages. To provide you with quality products. The company has passed the1S09001: 2015 certification, and the products can pass various tests, such as: SGS, BV, etc. Our production philosophy: Quality first, excellence, pragmatic innovation.

Jiangyin Senphus Electrical Material Co., Ltd is a new Hi-tech enterprise of heating alloy, heating cable/mat, heating wire, silicone rubber heater, drum silicone rubber heater, thermostat, which is engaging in R&D, manufacture and sale.

We have our own alloy smelting factory, possessing first-class production and advanced research facilities, so that we guarantee the top quality of our products. We have already passed ISO9001 quality management system and achieved the examination report of National Center for quality Supervision & Test of Electric Wire & Cable, and gained the European Union CE certification, UL certificate, GS Certificate, electromagnetic radiation certification, SGS and REACH certification.

Heating cable/wire and temperature controller system are widely used in wind power blades, construction heating, pipeline heating, outdoor snow melting, soil heating field and so on. Silicone rubber heater are widely used in electrical household appliance, spaceflight, petroleum, metallurgy, military project, chemical, electric power, medical appliance, mechanism, outdoor communication, automobile, etc. Industry.

Our products have been exported to America and Europe, Africa, Southeast Asia, like USA, Canada, England, France, Holand, Poland, Peru, South Africa, Italy, Greece, Thailand, India, Hongkong, etc. More than thirty countries and areas.

Our company always persist in"reputation first, quality high and customers supreme" management ideal. We will use great products, competitive price, professional service to cooperate with you and gain win-win!

OEM is welcome! !

Guangdong Zhongshi Metals Co., Ltd, Founded in 1999, high-tech enterprises, designated supplier of welding materials for national aerospace and military industries. Registered capital 22 million, has passed the ISO9001, ISO14001 and QC080000 certification. Our main products are solder paste, solder wire, solder bar, annual production capacity more than 6000 tons.

The company's existing staff of about 150 people, including college education accounted for 32.7%, 13.3% R&D personnel, senior engineer 5, 8 professional engineers, Assistant Engineer 7, long-term and Tsinghua University, Guangdong University of Technology, South China University University, Central South University, and other units to carry out academic exchanges. And the Guangzhou Institute of Nonferrous Metals, China - Ukraine Barton Welding Institute cooperative research and development, set up a 20 to lead pH. D., graduate students and academic staff consisting of about R & D elite team, and the establishment of doctoral and master workstation and welding materials R & D Engineering Center.

Application since 2006 dozens of patents, more than 10 patents for inventions, two patents license, the company's products with independent intellectual property rights, and achieved a good market and brand.

The company has passed the ISO9001 quality management system, ISO14001 environmental management system, QC080000 hazardous substance process management system. Now China Electronics Materials Industry Association Board Unit, ITRI-IPC China Council Vice-solder technology units. 2008 joined China Electronics Materials Industry Association electronic tin solder materials Branch of China Electronic Components Industry Association capacitor branch. 2009 "National High-Tech Enterprise", "Guangdong Province, private technology enterprises", "Dongguan City, private technology enterprises, " the honorary title, and in the same year in Dongguan City Association of standardized, high-tech enterprises in Dongguan City Association, Dongguan City, private technology Enterprises Association, "solid" brand to obtain trademark registration book. 2010 was "Dongguan patent nurturing enterprise", 2012 is eligible for the "three consecutive years, Guangdong Province Credible Enterprise" honorary title. 2011 was "patent pilot enterprises in Dongguan City, " "global strategic partnership Fair, " "Fair quality partner suppliers, " the honorary title. 2013 was named the Ministry of Industry and Information Technology "national industrial brand development business model, " the same year was named the Guangdong Province and Dongguan City Enterprise Board, "Guangdong Province and Dongguan City, private enterprise innovation industrialization demonstration base. " 2014 through the city, the provincial engineering technology research center, in 2015 made "Guangdong famous brand"

Jiangsu Shengpo New Material Technology Co., Ltd. Was founded in Changshu, Jiangsu, China. The company employs more than 200 and annual output value of more than $80 million. And our company has more than 20 technology patents in various fields. Shengpo is the supplier of titanium strip and welded pipe, nickel alloy strip and pipe, stainless steel cold-rolled strip and pipe for global market: TP304/L, TP316L, TP321, TP309S, TP310S, INCOLOY840, UNSN08800, UNSN08825, Hastelloy C276, 1.4828, 1.4529 (UNS N08367), 904L, 2205 duplex steels, TA1 (Gr1), TA2 (Gr2), TA10 (Gr12), etc. Products are widely used in appliances, chemical industry, medicine, printing and dyeing, environmental protection, power industry, pressure vessels, seawater desalination, water treatment, etc. Our factory has complete sets of advanced production equipment and top-class technical team, constantly creating new technologies, new processes, new products, providing customers with the best quality service and products Upholding the spirit of solidarity, efficiency, meticulous work and innovation. Shengpo is committed to the research and manufacture of titanium, nickel alloys and stainless steel to provide high-quality products and first-class services for global customers. In good faith, high quality, mutual benefit, the company will continue to expand with more domestic production, support, distribution, enterprise cooperation and common development hand in hand!

Company Profile

Zhuzhou Lihua Cemented Carbide Co., Ltd

About Lihua Cemented Carbide

Established in 1990, specialized in production carbide products more than 20 years and located in huzhou city which is the hometown of tungsten carbide in China.

Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc.

Main Products

Our Main products include: Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter: Woodworking tool, V-cutter, textile cutter, shoes cutter ects, Any kinds of customized carbide products.

Monthly capacity of 15 Ton

We have sophisticated equipment, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity up to 15Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.

Strictly QC

We have a professional QC team follow to the System of ISO9001: 2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.

Contact us

Know more about us via http://lihuacarbide.en.made-in-china.com

Wisdom is a professional export-oriented company, which located in Shanghai, one largest commercial city in China. We mainly manage alloy products, thermal spray consumables, Cobalt alloy consumables, winding machines, Tungsten Carbide Corrugated Roller, Ceramic Anilox Roller, metallic substrates, and other related products. Our company has been engaged in these fields for many years and has a sound reputation and credits among the foreign customers and suppliers with our great variety of first-rate quality products, novel design and good services. Our selling net-work has expanded to Middle East Area, European countries, America etc.

We warmly welcome friends of various circles to come to visit and talk about business with us. We have established excellent business relationships with lots of our old partners based on equality, mutual benefit, customer first & service foremost, contract respecting. We look forward to your business negotiation and will sincerely be your best trade partner.

Introduction to HUONA

Huona (Shanghai) New Material Co., Ltd. Was established in 2008, currently have three divisions: Magnesium Division, Thermal Spray Division and Functional Material Division.

Magnesium Division produces magnesium metal products. Various models of high-quality magnesium alloy plate, magnesium rods, high-purity magnesium, magnesium plate, magnesium die casting, magnesium extrusion profiles and other metal magnesium and deep processing products.

Thermal spray wire Division offers a wide variety of pure metal and metal alloy wires, including nickel-, iron-, aluminum-, and zinc-based wires for thermal spray projects.

Fuctional Material Division supply electronic packaging COMPONENTS(GTMS, CTMS), soft magnetic alloys and bimetal strip.

Our company is certified by ISO9001 quality system and ISO14001 environmental protection system.

Mission Statement

We try our best to understand and utilize information within the environment. With this competency, we assist customers to create added value and contribute to the development of industry and healthy living.

We strive for "Best, " welcome challenges, and are relentless till we deliver products and solutions.

Guangdong Guangyun New Material Co., Ltd with an area of 238, 000.00 square meters is located in Yunfu High-tech Development Zone, as one of the largest manufacturers in South of China, is mainly specializing in producing aluminium sheet, coil and foil etcs. We have an excellent team of highly qualified management personnel and technicals. With 1.2 billion RMB capital invested at the 1st stage project and a series of advanced production equipment at home and abroad added, the new annual capacity can reach 300, 000.00 metric tons. Our main products cover aluminium sheet, aluminium coil, aluminium foil, aluminium tread plate, and aluminium circles with alloy ranging from 1000 series to 8000 series, temper from O to H112 and sizes according to client's requirements. And we can also supply aluminium sheet or coil further processing, such as anodizing, stucco embossing, color coating, corrugation, perforation, polishing, brushing etcs. All kinds of different aluminium products are widely used in decoration, construction, machinery, ACP, ceiling, chemical industry, aerospace public utilities, shipbuilding, packaging etcs.

Guangyun is committed to technological innovation and research and development. It has been recognized as a high-tech enterprise and a specialized and special new enterprise in Guangdong Province. It has established Guangdong New Aluminum Alloy and Composite Engineering Technology Research Center, Guangdong Provincial Enterprise Technology Center, and Yunfu New Aluminum Alloy and Composite Engineering Technology Research Center. Guangyun has established a strict quality management and environment protection system, which has passed the ISO9001: 2015 and ISO14001: 2015 management system certification.

With so many years of experiences on export and domestic business, we can supply stable high-quality products, fast delivery and best after-service to our clients.

In the future, we will firmly adhere to our principle of "Establish Company Image by Creating Our Own Brand, Strive To be The Best by Providing High Quality Service", and it is our sincerest wish to hand in hand and create brilliance with you!

Shandong Xinchengyuan Import and Export Co., Ltd is a professional steel company engaged in the research, development, production, sale and service. It had five branch companies. Our annual sales nearly one billion, about 280, 000 tons steel, It is located in Jinan with the convenient transportation access. In line with the development concept of quality conquer the world, service achievement future. We dedicate to strict quality control and thoughtful customer service, and our experienced staff members are always available to discuss your requirements and ensure every customer satisfaction. Our main products include PPGI, galvanized steel, steel plate, round bar, steel pipe, Stainless steel product, angle bar, steel pile, H beam, I beam, angle, Channel flat steel etc. With double guarantee of service and management system. Main market distributes in North America, South America, Africa, Southeast Asia as well as Oceania. We have established long-term and win-win partnership with many large steel manufacturers, such as Baosteel, Laiwu Steel, Rizhao Steel, Handan Iron and Steel, Angang and Maanshan Iron and Steel. We always foucesed on the intergration of reasources, in line with the concept of win win cooperation. Sincerely wish to build a long and regular business with you forever.

BAOJI TOPTECH INDUSTRIAL Co., Ltd was invested by "H. K JINLONG INDUSTRIAL Co., Ltd", The predecessor was "Shanghai launch Detection Technology Co., Ltd established in 2000 year. We are professional manufacturer for all kinds of metal detector machines in China.

Our products cover the industrial machinery equipment industry and titanium metal processing industry. Industrial equipment including metal detector, weight sorting machine, security metal detector, X-ray detector, pharmaceutical detector machine, automatic packing machine, clothing needle detector machine. All products have passed the international certification such as CE and are widely used in all kinds of food inspection, packing process inspection, online weight inspection and sorting, pharmaceutical inspection, public security inspection, textile, garments, toys, apparel, shoes, quilt rubber, chemical products inspection and others industries. Our products has been exported to southeast Asia, Middle East, America, Africa, Europe and other international markets.

We cooperate with leading and specialized manufacturers in the titanium industry to establish a group of professional, high-level metal industry technical personnel, and continuously develop new products to meet the market demand.

Titanium processing products specialized in titanium and titanium alloys, tungsten, molybdenum, tantalum, niobium, nickel and zirconium and other rare metals, including the bars, rods, plates, tubes, wires, films, tapes, foils, fasteners and drawings machine parts, with other deep processing products. We strictly execute the standards of GB/T, ASTM/B, ASME SB, AMS, DIN, JIS and other requirements from customers. Our Products passed a number of international certification, widely used in metallurgy, electronics, ceramics, petrochemicals, aerospace, machinery, medical and automotive industries and other industry fields.

Our company has always been adhering to the development strategy of "quality first, continuous innovation, customer service".

Baoji TopTech, looking forward to work with new and old friends, create brilliant together!

Tianjin TEDA Ganghua Trade Co., Ltd. Was established in 2006, located in the heartland of China-Tianjin, which is one of the four municipalities in China and also an open coastal city. Due to the special geographic position, Tianjin is one of the biggest business centers in North China. We enjoy excellent geographic location and convenient water, land and air transportation.

We mainly produce and process stainless steel sheet/plate, stainless steel coils, stainless steel pipes, wear-resistant manganese plate, nickel alloy pipe etc.; we are the first agent of Taigang, Baogang, ZPCC, LISCO and TPCO etc. We have plentiful source, diverse categories, bulky inventory and inexpensive prices. We can customize standard and nonstandard products with high quality in short time. In addition, we have plate shearers, drawbenches, polishing machines and so on. The main material for our products are AISI 201, 202, 430, 410S, 3Cr12, 420, 420J1, 420J2, 304, 304L, 316L, 310S, 309S, 316Ti, 321, 409L, 444, 904L, S31803, S32205 etc.; ASTM A36, A53 A106, ASTM A283, AISI 1010, AISI 1020 and API SPEC 5L; 5CT pipe etc.; The products are widely used in such fields as chemical industry, chemical fertilizer production, petrochemical industry, natural gas industry, nuclear power plant, space and aviation, environment, food machinery, water supply, architecture, boiler heat exchanger etc.

Our company adheres to the tenet of "survival by quality, build brand by reputation, win market by prices and innovate to develop", has developed international markets and the products are well sold in many countries as Dubai, Indonesia, Thailand, Vietnam, Malaysia, Spain, Brazil, Colombia, Belgium, Germany, England, Panama, Argentina, Chile, USA etc.

We warmly welcome clients from all over the world to cooperate with us and develop worldwide market together. Also we hope we can have chance to establish long-term business relationship with you on the basis of mutual benefits.

China Thrive Industrial Co., Ltd are professional manufacture/trading company that specializes in high quality Copper/ Brass wire, flat wire for zipper, copper tube and many different of products that our customers are interested with competitive price. We are Located in Ningbo, China.

And our unbeatable manufacturing capabilities are perfect for either the shelf' products for custom products that you have designed yourself. We are able to supply products that are compliant with all major quality certification organizations.

We have accumulated abundant experience and established stable and credible business relationships with customers worldwide. With rich experience in dealing with all types of large and small orders, we have developed extensive contacts with many local and international freight organizations. Consequently, we are able to ship our goods safely and reliably to almost anywhere in the world.

We are an international company, integrating sales, processing and outsourcing. Products we sell are all famous, in-style and fashionable in USA, Europe, Canada, Japan and Korea.

We are always trying to improve our site and relationship with customers. Welcome customers to negotiate business and establish long-term friendly cooperation relationships with us in the near future.

Business strictly in accordance with relevant state laws, regulations and rules of the WTO requirements management according to law, actively participate in regional economic cooperation, recent years the company has reached annual sales of as much as 25, 000, 000, business prospects and good, the next time, My company will expand the scale of operation and steady development of corporate economic, sincerely seeking partners, good faith cooperation and seek common development, writing a new chapter.

Reach the world Win the future. Let me working together.

Di Ao International Trade (Tianjin) Co., Ltd. is the subsidiary company of DL Industry Group. It is the main export window of the group. DL Industry Group is a professional comprehensive group company which built in 1989. It is combined with LED Light(dl-group. En. Made-in-China. com), scaffolding and metal (dl-group. En. Made-in-China. com), Paper (dl-group. En. Made-in-China. com), smart watch, chemical, plastic, and Di Ao trading.

The smart watch factory of DL Industry Group Limtied is located in Shenzhen. As the demand increase of smart watch, DL Group bought the smart watch factory in 2017.

DL light No. 1 factory is in Shenzhen factory, No. 2 factory is located in Zhongshan. DL light produce and supply street light, flood light, highbay light, tube light, solar light, light bulb, explion proof light, etc. DL lights are the vendor of local government as its excellent quality, meanwhile export to Japan, Korea, Malaysia, Pakistan, etc.

The DL scaffolding factory located in JInghai where is near the Xingang port. As top quality of DL scaffolding, we establish long term cooperation with many partners such as: CCCC, CRCC, Ethiopian Kibru Fitret Melaw (Grade 1. Building Contractor), Bahrain Master Construction Co., etc.

The duplex board factory is built in Shenze, and supply to whole north of China and all over the world. Currently DL paper can supply duplex board with grey back, meanwhile with the high innovation, DL paper create the Duplex board with yellow back which is stronger than the grey back.

DL chemical focus on glass industry, printing and dyeing industry, water treatment industry, etc, and supplying to UAE Emirates Float Glass LLC, Turkey Zulfikarlar Group, Socmin Limited, etc.

For plastic cargo, DL group always produce the safe and reliable plastic part for clients, for example, DL design and produce the new type carton plastic storage box which export to Tesco in Malaysia, to Singpore, Korea, Italy, etc.

Mainly, DL Industry Group will continue to focus on building more beautiful life with you.

Zhuzhou Eastern Carbide Co., Ltd., the one which provide the most effective solution for you on tungsten carbide parts.

Create the value for our clients is our company spirit, we have professional teams for production and sales, you will find it is simple and easy to do business with Eastern Carbide, it will save you time, cost and energy to get the perfect match product from us.

Currently, our main market is Europe, North America, South America, Australia, Africa and south Asia, we are selling our product to over 30 countries and we expect long term relationship with you.

We always follow the high quality standard for our production, we produce different types of carbide parts here, not only the standard product, but also customized carbide parts.

Our regular product is tungsten carbide tips, carbide inserts, end mills, carbide saw tips, carbide mining parts, carbide rods, plates and stripes.

We also have rich experience for customized product, we make your designs become real product, which perfectly match your need. We have many successful projects on the for our clients in different countries, Zhuzhou Eastern Carbide will give you the best solution on this filed.

Eastern carbide have strict quality control syste, our QC team will responsible for every single order, from the raw material inspection, semi product inspection and final production inspection. We have the first class inspection machines to support, including Cobalt magnetic detector, TRS testing machine, Metallographic microscope...

Our professional teams will take care of your product and ensure the goods quality for all batches of product.

Eastern carbide will give you the best support as partners and we expecting you can join us.

Zhengzhou Alloy New Reserves Co., Ltd., cooperated with domestic factor, Which is a comprehensive enterprise with the right of export, mainly focus on exporting of Rare metal, Semiconductor materials and High performance non-ferrous alloy material, Like Indium/Germanium metal and related wafers, aluminium alloy, Copper alloy, Lead alloy, Zinc alloy, Master alloy, Deforming alloy, Military special alloy, Forgings and Castings, Extruded profile etc. Meantime, we are dedicated to global customers to provide a set of tailored high quality Non-ferrous alloy solution according customer's requirement. Which involves select material, material fusion cast process, Machining, link, surface treatment to the final parts of the whole process service.

Our supplier factory are leader manufacturer of aluminum lithium alloy, magnesium lithium alloy, magnesium rare earth alloy and high strength Al alloy for aerospace in China. With the research progresses accumulated over 10 years in non-ference alloy, own the advantages with respect to Outstanding talents team, high&stable technology, Fine quality, Excellet management, Fast delivery and Timely special service, can make a support on the small quantity trial order and large quantity order.

The product is mainly used for infrared optical industry for both military and civil purposes, space satellite, aerospace field, 3C field, high-efficient solar battery, semiconductor, LED lighting, microwave telecommunication, optical fiber communication, microelectronics, flat-panel display, cutting tools, jewelry, crafts and Gem diamond etc.

We sincerely hope tocooperate with any company in home and abroad to build a prosperous future together!

WuXi TaiXie Metal Material Co., Ltd. is Located in the Large South Stainless Steel Markets, and established July 2009. We are also One of the Powerful Company In the Stainless Steel and Mould steel Area.

Now there are four Department of our company:

Taixie Special Steel(Mould Steel) Department was founded in April 2009;

Taixie Stainless Steel Department was founded in April 2010;

Taixie Aluminum Alloy Department was founded in May 2013;

Taixie Copper Alloy Department was founded in June 2014;

We Have 2000 Square Meters Of Storage And Processing Center Which Covered Equipment Using In Slitting, Cutting In horizontal, Laser Cutting, Plasma And Grinding Machine And Embossing Machine. We Mainly Sell Stainless Steel plates, bars, pipe. Mould Steel, Special Steel, Copper Alloy, Aluminum Alloy and Copper Alloy, Brass pipe/bar/flat/sheet and Red Copper. Applied for Decoration, Medical Industry, Mould Industry, Construction Industry etc. Successfully passed the quality system Certification: ISO9001-2008 and got the SGS.

Shandong Xinhe International Steel Co., Ltd is registered in the year of 2019 with the capital of 50, 000, 000RMB, and we have been in steel range for more than 20 years.

The company is located in Liaocheng City, Shandong Province China. Here is the No. 1 steel base within Asia.

At present, we have two miss for steel pipes and plate series production and processing, and three warehouses for keeping goods. Our yearly production scale can be reach to 500, 000tons, and our warehouse stocks is yearly above 20, 000tons. So that we can meet all kinds of demands from different countries clients. Our salesmen are trained to get the best and professional skills on doing export trading dealing with various kinds of issues in the trading, which is a base that our buyers can have good buying experience. Till now we can supply the good quality products consisting of and not limit to the following, steel pipes, bars, rock bolts, guardrail composite pipe, guardrail board, color coated steel coils, galvanized coils, steel balls, steel chains, steel plates and steel bearing. Besides we can provides processing procedures for the steel products, like anti-rust protecting, cutting and chamfer, coupling, heat treating, bending, galvanizing, polishing, beveling, pickling, plastic spraying, CNC machining, and so on.

With efforts of our staff we have the pleasure to serve the clients from more than 20 countries and areas, We earned good reputations from the clients without any claim. We finally become good friends and intimate partners with them.

Looking forward, we get good confidence that we will expand our business scales to more countries and areas, and serve more people in the world. Because we always believe quality of the commodity is the life of company, stability is the essence of quality. Also the integrity in business will help bring the long term business relationship, so it is the code that one company can develop and survive.

We are looking forward to the cooperation with you! We believe one time cooperation, friends forever!

Established in 1998, Runfei Steel Group has developed into a large-scaled enterprise, located in the city of Tianjin, which is the largest artificial harbor in north China. With convenient transportation advantage of Tianjin, intellectual marketing network, powerful system of storage, processing and distribution, and good reputation, Runfei has successfully set up a win-win platform between mills and clients.

We have two steel processing factories mainly for cutting and slitting. Our superior products are HR/CR GI/GL/PPGI/PPGL/ coils,

With continued development, we have specialized in several construction materials including steel pipe, roofing sheet, and so on.

Runfei started its oversea trading since 2004 when it obtained the import and export license of proprietary trading, providing the international standard processing and distribution service for customers all over the world.

The headquarter of Runfei Steel Group is located in the CBD of Tianjin economical development region - Airport Economic Area. With the continuous expanding of business, Runfei had established Tianjin Runfei Trade Co., Ltd, Runfei (HK) Co., Limited, Tianjin Runfang Steel Processing Co., Ltd, andTianjin Runfei Steel Processing Co., Ltd. Runfei now owns one processing center for hot rolled steel and the other for cold rolled steel, both are located in Tianjin TEDA Industry Area, taking up over 113, 220 square meters. The storage capacity of Runfei is 70, 000 metric tons and the annual comprehensive processing capacity comes to 1 million metric tons.

Our goal is to become the comprehensive service center combined with proccessing, assorting and storage. Our mission is to be the pioneer of cost solution and service concept in steel industry chain.

Tianjin Yitejia Steel Sales Co., Ltd. We are professional on Stainless Steel Products&Aluminum Products, and have more than 20 years experience. Our company is based in Tianjin, China. We are SGS and BV certificated.

We can supply high quality products, good service and competitive price. We have been devoted to production such as stainless steel plate/sheet, stainless steel coil&stainless steel bar, and aluminum& copper material, Key products have entered into key fields and new industries such as petroleum, chemical industry, shipbuilding, container, railway, automobile, urban light rail transit, large power stations and so on.

We provide stainless steel plate, stainles steel tube. Stainless steel bar

Standard: ASTM, JIS, DIN, AISI, KS, EN, etc.

Material: 201, 202, 301, 304, 304L, 304LN, 304H, 309S, 310S, 316, 316L, 316Ti, 316LN, 317, 317L, 316JI, 317JI, 310H, 304Ti, 309, 310, 321, 330, 660, 403, 410.

We can supply quality alloy aluminum sheet, alloy Aluminum tube, aluminum bar.

Alloy: 1050, 1060, 1070, 1100, 1145, 1200, 3003, 3004, 3005, 3105, 5005, 5052, 5083, 5754, 6061, 7075, 8011

Temper: O, H12, H14, H16, H18, H22, H24, H26, H32, H34, H111, H112, T6, F, T651

Quality First, Mutual Benefit" is our principle, the sincere and professional service is our objective, development jointly with our partner is our foundation stone.

We are looking forward to cooperating with different business friends from all over the world. Your satisfy is our best goal!

Please feel free to contact with us.

Union Steel Industry Co., Ltd as member of United Steel Industry Group, specialized in steel pipe and pipe fittings designing, manufacturing, stocking and exporting in China. As one of the leading manufacturer of steel pipe products in China, Union Steel Industry Co., Ltd are committed to providing one-stop service to customers around the world.

Union Steel Industry Co., Ltd has leading technology of steel pipe production and research at home and abroad, advanced and complete testing facilities. We strictly in accordance with the ISO 9001 quality management system for on-site management, SGS, BV, TUV, ABS, LR, GL, DNV, CCS, RINA, RS and other authoritative TPI organizations. For years, steel pipe products supplied by Union Steel Industry have been widely applied in engineering projects such as oil and gas extraction, water transportation, urban pipeline network construction, offshore & onshore pipeline construction, mining industry, chemical industry and power generation industry pipeline construction. Our partners are throughout Southeast Asia, the Middle East, Europe, Africa, South America, Oceania, and more than 100 countries and regions. We also provide many steel pipe products and services to the worlds top 500 petroleum and gas, EPC companies, such as: PetroChina, Schlumberger, ADNOC, NNPC, ENI, NICO, EGPC, OXY, CCE, OGDCL, PEMEX, etc.

Adhering to our principle of"quality first, win-win cooperation", we are confident to supply customers with high quality products at very competitive prices. Union Steel Industry Co., Ltd will always be you the most professional and reliable business partner.

To expand the international market and get the advantages of markets in Hong Kong, We, FUSHUN SPECIAL STEEL Co., Ltd, were established by Huangshi Chengquan Group in 2014.

Based on its manufacturing capacity, We, Fushun Special Steel Co., Ltd., are engaged in the import and export of iron alloy steel and other special steel.

Export:

Our own products:

Tool Steel: (carbon tool steel, alloy tool steel, high-speed tool steel),

Die steel: (cold work die steel, hot work die steel, plastic die steel)

And sale: Structural steel(carbon structural steel, alloy structural steel)

Shape: Round, square, flat, heavy thickness plate, heavy wall thickness steel tube.

Stainless steel, Bearing steel, Spring steel, Cold Heading Steel, Forgings

Imports: Ferroalloy (chromium iron, nickel iron, vanadium iron, molybdenum iron, etc. )

To provide high quality services for global customers, We insist in the follow principles:

Best price: Try our best to give the lowest price

Top quality: Fake a penalty ten

Fast delivery: Timely delivery

One stop shop: With 20 year business experience, we know steel sources in China, and we can provide a one stop shop service.

After service: Responsive, quality objection don't shuffle.

Zhuzhou Jinggong Industrial Co., Ltd is one professional manufacturer and leading supplier of tungsten carbide products, founded in 2001 and located in the National High & New-tech Development Zone in Zhuzhou city of China. We are one provincial high-tech enterprise specializing in development, production and sales of cemented carbides.

Our company has our own research and development and production base-Jinggong Industrial Park, which occupies an area of 69445 square meters with a factory building area of 40000 square meters. We have advanced cemented carbide production equipments, first-class testing center, assorted precision mould production line. Our yearly production capablity for tungsten carbide is up to be 1000 tons. Our R&D team consists of doctors and professional engineers, who are engaged in researching and developing high performance cemented carbide products. Our professional salesmen can recommend suitable products and solutions for the customers in time.

Our company has passed ISO9001, ISO14001 certificate and OHSAS18001. The series of our manufacturing cemented carbide products are carbide saw tips, carbide pins, carbide cutting tips and inserts, carbide rods, carbide blanks, carbide drawing dies, carbide cold heading dies, carbide indexable knives, disc cutters, rolls and rings, woodworking cutters, geological mining tools, carbide strips and plates, non-standard carbide products and other special wear parts for the different applications in the modern industry. With ZZJG as our trademark, our products enjoy a rather high reputation in the carbide industry and are well-marketed in China and have been exported to some countries and regions in Southeast Asia, North America, South America and the European Union.

We sincerely thank all of customers for your kind trust and support. We cordially promise that what we provide is not only the excellent products, but also high effective service.

Hebei Ruisite Technology is located in North China. As one of the most dynamic foreign trade companies in the Chinese market,

We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.

Since 2002, we have already developed and established good business relationship with Russia, Chile, the USA, India, Pakistan, South Africa, Benin ect worldwide reputed customers. Based on the experienced and professional sourcing and trading business in chemical field, we can guarantee the quality and stability of goods.

We have clients throughout the world, including Europe, South America, North America, Southeast Asia and Africa.

We are specialized in providing abundant chemical products to meet customers' demands, and can also provide customized products service such as Titanium Dioxide, White mineral oil, White petroleum jelly, STPP, Citric acid, Lutein, Amygdalin, Grape extract ect.

We has a professional and energetic team, and most team members have 4 -10 years export experiences. With the joint effort of whole team, the company has got rapid development in past years, and our customers have spread to more than 125 countries all over the world. The company's products are both specialty and comprehensive. Our development team is composed from the study abroad return specialist, leather engineer bachelor degree holder and leather chemical chemist, have the extremely high research and development ability.

"Mutual benefit" is our unremitting pursuit. Looking forward to our common progress.

Our business is based on honesty and mutual-trust. Sincerely looking forward to establish long term and mutual beneficial business relationship with worldwide customers.

Sino Zheng Industrial Inc. is a leading supplier and manufacturer in magnesium forged wheels, magnesium heat sink, magnesium welding wire and cathotic anode protection. Our company uses advanced production technology and automation equipment to ensure the high quality and high stability of magnesium products. The magnesium rods produced by the company are refined by a special process, with small grains, uniform inside and outside, low impurity content, and no peeling; The company's die-casting production line uses these magnesium rods as raw materials to produce magnesium bicycle frames, rims, and magnesium profiles. High-quality products such as crossbow racks.

The company has now developed a formula and process for producing high-quality magnesium products, which are inimitable. Magnesium welding wire produced with this formula and process can realize compatible welding between different magnesium materials, that is, different materials of magnesium products can be welded with one kind of welding wire, and have the advantages of small thermal effect zone, deep welding penetration, and no blistering. In particular, the 1.2mm magnesium welding wire produced uses a one-time extrusion process to replace the original extrusion and then drawing process. Relying on the excellent technical team in the industry, the company continuously expands the application range of magnesium materials through technological innovation, product innovation and process innovation, and contributes to the development of the Chinese magnesium industry.

Our company is currently a professional manufacturer of magnesium welding wire in China. The magnesium welding wire produced by the company has specifications such as 1.2mm, 2.4mm, 3.2mm, etc., all of which are produced by one-time extrusion molding process with stable quality. With these magnesium welding wires, different types of magnesium materials can be welded together. The heat effect zone of the welded parts is small and the weld strength is higher than the non-welded zone. The bicycle frames welded with these magnesium welding wires can achieve more than 150, 000 vibration tests without cracks.

The application of magnesium welding wire completely solves the welding problem of magnesium products, can promote the wide application of magnesium profiles in chemical, aerospace and civil applications, can increase the total application of magnesium profiles in country, and maximize the high reserves of magnesium profiles in China Propelling the magnesium industry into a stage of rapid development will bring a material revolution to our country as soon as possible.

Henan shengbang medical technology Co. Ltd is located in Henan, China. We specialize in digital denture processing eqquipment and consumables.

Our R&D team has been closely following the latest development of dental restorative materials and denture processing equipment in the world, aiming at the global digital dental solutions, constantly creating possibilities for the emergence of new dental restorative materials and equipment.

Products Show

1. Dental embedding Material

1) Dental embedding material for crown & bridge

2) Dental embedding Material for Bracket

3) Dental embedding Material for pure titanium

2. Dental processing equipment

1)Automatic dental casting machine type XF80-2

2)Digital intelligent dental casting machine type XF100-1

3)Dental titanium casting machine type SL315-2

4)Dental engraving machine XF40

5)Zirconia sintering machine SJ05-1

3. Dental Alloy

1) Dental nickel-chromium cast alloy grain

2) Dental cobalt-chromium stent alloy

3) Dental nickel-chromium porcelain alloy

4) Dental cobalt-chromium ceramic alloy

5) Zirconium ceramic blocks for all ceramic dental prostheses

6) Tungsten steel grinding head for mechanics

7) Mechanic needles

Shanghai Trisun Parts Manufacture Co., Ltd., established in 1998, is one of the biggest mechanical seal manufacturers in China.

Our seals can replace the similar products of JOHN CRANE & BURGMANN, Flowserve, MTU etc. They include four main series: Water pump seals, industrial pump seals, auto cooling pump seals and auto air-con compressor seals

TRISUN has quality management system certificates of ISO9001: 2008 and TS16949: 2009, material quality certificates of WRAS and FDA, environmental management system certificate of ISO14001: 2004,

Becoming the appointed OEM supplier for domestic and world noted overseas companies, such as SANDE and DENSO COMPANY (China Branch) and ITT. Moreover we have supplied compressor seals for Volkswagen and Bizer and cooperated with Flowserve and MTU.

After 20 years developing, now we have total 200 employees and 13, 661 sqm workshop area. The turnover in 2016 was 110 million in RMB (about 16 million in USD), share of export was 70%, produced about 9 million PCS of mechanical seals. We have three production bases in Shanghai, Wenzhou and Jiangsu respectively. Our strong production capability enablez us to offer you a quick delivery.

NY TWO GLOBAL is a multiple-industries-integrated company covering the Package, Refractory, Abrasive, Alloy, Chemical, Machinery, Tools, and mineral industries.

By owning bauxite mines and plants, we build a strong advantage in refractory, abrasive & mineral industries. Over decades of development, we have developed various products including, brown fused alumina, white fused alumina, tabular alumina, white fused mullite, fused magnesia, bauxite, etc. In the refractory industry.

To provide a better service to customers, we built our tests lab to control the chemical & physical parameters as well as a research development center for advanced material in the refractory industry.

By strong integrated investment in the packaging industry between China and India, we are servicing our customers globally by providing comprehensive package solutions. Products include FIBC, cartoon boxes, and various industry bags.

After over 20 years supplying of abrasive raw materials, we have built strong connections with most of the Chinese abrasive tool manufacturers, by investing in a wheel disc plant, we can provide the best offer with good performance to meet most of the abrasive demands.

NY TWO is a dynamic channel-based company committed to delivering top-notch services and cutting-edge products across various countries, catering to specific industries. Our unwavering dedication to professionalism and reliability sets us apart. Currently, our extensive service network spans multiple regions, including India, China, South East Asia, Turkey, Europe, and the United States. We take pride in our expert teams situated strategically in key locations such as India, China, Singapore, Turkey, Spain, Germany, and the United States. This allows us to efficiently serve our clients with localized expertise and ensure prompt support.

Zibo Hitech Material Co., Ltd. is a main Chinese supplier and exporter providing reliable products such as refractory products, high temperature alloys and stainless steel at cost-effective prices for the globe market.

Hitech Material always guarantees that each of our customers, traders, commissioners, buyers and sellers, users and suppliers will obtain substantial benefits and development from the long-term cooperation and partnerships with us.

We are aiming at becoming the most reliable supplier in the supply of refractory products and alloys around the world.

Our tenet is "Quality is the root of our survival; Service is the way of our development". "Being the most reliable manufacturer and supplier worldwide" is our goal.

Members of Group Company

HM Group consists of a group of companies:

Hitech Material Refractory Ltd.: A specialized and well experienced refractory manufacturer and exporter

Hitech Material Ceramic Fibre Ltd.: A specialized and well experienced ceramic fiber manufacturer and exporter

Hitech Material Alloy Ltd.: A specialized manufacturer in making all types of high temperature and corrosion-resistance alloys.

Shandong YingYi Import&Export Co., Ltd focus on manufacturing and marketing of Copper products. The product scope mainly expand to five series including plate, strip, pipe, bar and profile, which mainly used in power transmission, electrical, ship building, energy industry, mechanical processing and railway constructions etc.

We are developing continuously in the whole country with high quality and service, meanwhile we can customize and develop new products according to customer's practical application and supply product aimed to different cost and performance requirement. Our business are mainly involved in industry of America, Spain, Mexico, Nigeria, Philippines, UK, Germany, Kenya, Saudi Arabia, UAE, Malaysia and Africa etc.

Business philosophy: Quality first, price best, market-oriented and customer-core.

Business culture: Innovation is the eternal theme, excellence is our constant pursuit.

Warmly welcome and looking forward to cooperate with your honored!

China Rarlon Group Limited, with experience starting in 2008, is an import and export company focusing on the production, trade and comprehensive services of building materials and hardware accessories. The company's main products include: Sheets, coils, pipes, profiles, wires and other carbon steel products, stainless steel and aluminum products. By-products include hardware fittings, flanges, elbow fittings, copper products and nickel products. Now we are an international conglomerate with a worldwide presence.

Since its establishment, the company has continued to develop steadily and has completed the overall layout of North America, South America, Europe, Oceania, Southeast Asia and all over the world. As one of the excellent steel export suppliers in China, its products have been sold to many countries and regions and enjoy a high reputation in the market.

In the future, we will continue to work hard to become a national first-class steel trade enterprise! Rarlon Group always firmly believes that "people-oriented, integrity first" will help us win the future!

Permanent Steel Manufacturing Co., Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, casing pipe, numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc. As a factory, which specializing in the production, processing and sales of various steel pipes and pipe fittings size enterprises, headquartered in Hunan, the production base is located in Shandong and Tianjin.

Customized service

The Products from Permanent Steel Manufacturing Co., Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions. Client specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request.

Technical support

Permanent Steel Manufacturing Co., Ltd on a 250, 000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co., Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards. The wide product range of Permanent Steel Manufacturing Co., Ltd meets the requirements of the Unified European standards (EN) as well as BS, DIN, ASTM, JIS standards, or any other specific customer request.

Zhengzhou Shibo Nonferrous Metals Products Co., Ltd., is the High & New technology Enterprise specially engaged in developing, manufacturing and selling nonferrous metals products, electric heating elements, furnace and fire-proof material products.

Zhengzhou Shibo locates at Zhongyuan Industry Area, Zhengzhou City, Henan Province, where is a hub of communications, commercial and trading center in China. Holding the enterprise spirit of "Unity, Hard-working, Innovation, Efficiency", Zhengzhou Shibo enjoys high reputation for its high quality products and knight service in domestic and abroad, at the same time, the Company grows very fast with a total area of about 25, 000 square meters and 103 employees. The products are exported to USA, Europe, Middle East, South East Asia, Russia, Japan and Korea and so on owing to the keen consciousness of quality and commercial reputation.

Products of Zhengzhou Shibo are widely used in the applications of glass, Chinaware, lighting, magnetism materials, fluorescent materials, false crystal, Machinery, Electro Vacuum materials, industrial apparatus etc. There are four main categories of Products: Electric heating elements, Nonferrous metals products, Furnace and fire-proof material.

Zhengzhou Shibo values product quality and keeps pursuing excellent quality. Holding the concept of "Creating the value for customers and seeking for development with mutual benefit", Zhengzhou Shibo will sincerely serve the customers at home and abroad with quality products for a better future.

We sincerely welcome all the friends at home and abroad to visit our company.

Our company has a compound rolling mill, 20 roll finishing mill, 950 six-high finishing mill, 23-high stretch bending and straightening machine, bell-type annealing furnace, continuous annealing furnace, pickling line and other production equipment have obtained a number of technical achievements and practical patents. The company has established an enterprise technology research and development center, which has passed ISO9001 quality management system certification, 14000 environmental management system certification, production standardization enterprise, implementation of 6s management, adheres to technology-LED, scientific management as the policy; Firmly based on customers, and quality with the business philosophy of centering and price as the link, we are willing to go hand in hand with domestic and foreign counterparts to create brilliant.

The company mainly sells gilding metal clad steel strips, copper strip, copper rod, copper tube, and other raw materials. Copper cups, steel cups, gilding metal clad steel cups and other military stamping products. The company specializes in designing and manufacturing all kinds of stamping supporting molds and selling production equipment and machines. The products are applied to military industry, low-voltage electrical appliances, electronics, communications, house appliances and other fields. The company maintains close cooperation with many domestic and foreign military enterprises, and its sales network covers the world.

Tianjin Elegant Technology Co., Ltd., is one of the leading professional innovators, experts and manufacturers specialized in producing the various nonferrous metal clad composite conductive bus bars and anti-corrosive electrode (anodes and cathodes), such as titanium clad copper (Ti clad Cu, Ti+Cu, Ticu clad), stainless steel clad copper (SS+Cu), zirconium clad copper (Zr+Cu), copper clad aluminum (Cu+Al), three layers metal composite bars. Such conductive composite metal bus bars, the substrate material is copper or stainless steel, outside layer is compound metal (titanium, zirconium, nickel, stainless steel), ensure the very strong surface corrosion resistance, but also superior conductivity. So they are widely used in the condition of high corrosion to conductive body, such as electro-chemical, electroplating, electrolysis, hydrometallurgy, PCB, electric chemical industry, water treatment, ocean engineering, etc.

Every year, Elegant Titanium group has exported more than one hundred thousand tons TI CLAD COPPER bars to at least 30 countries, such as USA, Canada, Germany, United Kingdom, France, Italy, Finland, Norway, Greece, Czech Republic, Romania, Turkey, Russian Federation, Australia, Netherlands, Uruguay, Chile, Brazil, Argentina, Mexico, Slovakia, South Africa, Ethiopia, Egypt, Saudi Arabia, India, Malaysia, Vietnam, Indonesia, Thailand, South Korea, Singapore, Thailand, Japan, etc. We have got many many good reputations from caustic environment protection industries with our advanced technology, rich experience, fast reaction, especially the titanium clad copper bus bar stable quality, perfect performance and high cost-effective.

Elegant Group has more than ten sets of CNC lathes, precision punching and thread processing machinery, to produce:

1, the titanium/steel/Ni fasteners and high precision machining parts, mainly including titanium fasteners, screws, nuts;

2, flanges, reducer and bends;

3, Titanium and titanium alloy bars, rods, tubes, pipes, plates, sheets, wires, coils, foils,

4, titanium basket;

5, Various kinds of equipment made of titanium, such as titanium GR2 heat exchanger, titanium distillation tower tray, titanium anodes, titanium cathodes, copper anodes, anodes and cathodes, tank head, pipe end cap.

6, industrial vacuum cleaners

7, pressure vessel/ pressure tank/ fan air cooler

8, CNC precision machined parts

9, polycarbonate sheet

Elegant group also produce the polycarbonate sheet (hollow polycarbonate sheet and solid polycarbonate sheet) for the mine conveyor protection, (electroplating, electrolysis, hydrometallurgy, weld) workshop protection according to our customers demand.

To save your time and money, to decrease your risk and cost, is all the Elegant staff eternal pursuit. We sincerely welcome and hug all the customers from all over the world to visit our modern company, hope our titanium clad copper electrodes to be used more and more severe corrosion work environment.

7X24 hotline: 0086-13892758891 or email provides the most professional reply to your any questions about the titanium clad copper bus bar or polycarbonate sheet.

Established in 2017, located in Fengxin Industrial Area, Yichun City, Jiangxi Province, China, Jiangxi Ningheda New Material Co., Ltd. is the subsidiary company of Jiangxi Ningxin New Material Co., Ltd.

Jiangxi Ningxin New Material Co., Ltd. is an enterprise which specializes in R& D, production and sale of special graphite. The total investment is RMB 180 million. It covers an area of more than 70000 and produces 10000 tons of special graphite annually, which makes Ningxin to be the leading enterprise in the domestic industry.

On November 8th, 2016, Ningxin was listed of Chinese new third board. The stock abbreviation is Ningxin New Material, and stock code is 839719.

Jiangxi Ningheda New Material Co., Ltd. is mainly engaged in graphite product processing, graphite product matching service, providing graphite materials, graphite electrode and graphite products for the lithium industry, rare earth industry, machinery industry, aerospace, semiconductor and solar photovoltaic industry, together with the corresponding products technical service and technical application of update program.

With excellent production technology, good customer service, high market share, and relying on the advantage of new material, capital and management of parent company (Jiangxi Ningxin New Material Co., Ltd. ), Jiangxi Ningheda New Material Co., Ltd. Develops quickly. We devote to the extension of the special graphite industry chain, and make contributions for building the future whole graphite industry strategy.

Tianjin Dingshengwang steel Co., Ltd. is specialized in producing and marketing stainless steel products. The company is located in Tianjin which is an economic center in the north of China and international city. Oor company annual production capacity is 15000 tons of stainless steel welded pipe, and 800 Tons of seamless stainless steel, in strict line with GB, ASTM(ASME), EN, DIN, JIS and other international standard.

Tianjin Dingshengwang Steel Co., Ltd. is a professional suppiler with reputation for superior quality and advanced technology. Our company mainly supply all kinds of stainless steel sheet/ plates, stainless steel tubes/pipes, stainless steel coils and bars, etc.

Steel Grade: 304, 304L, 309S, 310S, 316, 316L, 317L, 321, 347H, S31803, 2205, 409, 410S, 420, 430, 904L etc. The produce are widely used in petroleum, chemical, paper, machinery, medicine, shipping, heat exchanger and other field.

Besides, we also supply carbon and alloy steel, galvanized steel, aluminum, copper and so on.

Specification group form that produce stainless steel welded pipe: Single slit(Φ 8mm-Φ 630mm), wall thickness(0.5mm-25mm), girth(Φ 630mm-Φ 3000mm), wall thickness(3mm-45mm)

Specification group form that produce stainless steel seamless pipe(Φ 6mm-Φ 610mm), wall thickness(0.6mm-30mm).

We have a strong and professional import and export business, the products are widely exported to Southeast Asia, Russia, USA, South American, Africa, India, Eastern and Western Europe, MID east, and other countries and regions. Our aim is "quality first and customer foremost".

Company concept: "Quality to win markets, improvement to win progress". Welcome customers all over the world come to our company to give guidance for development.

As a subsidiary of Hualong Holding Industrial Co., Ltd, Ningbo Galaxy Industrial Trading Co, . Ltd. was established in 1990 As the earliest enterprise in titanium industry in China, the company has become a key manufacturer of Titanium (Ti) Nickel (Ni) materials and pressure vessels in China now.

This company is specialized in the manufacture of Titanium, nickel and tantalum material, its core business is: Non-ferrous metal materials, clad metal materials and pressure vessels.

1) Non-ferrous metal materials: Plates, tubes, bars, wires, mesh, nickel plates, tubes, bars, wire, Crucible, foil and so on.

2) Explosive welded clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Titanium copper clad bars and Al/SS clad plates.

3) Titanium and nickel pressure vessels: Titanium reaction kettle, nickel reaction kettle, tube heat exchanger, plate heat exchanger, etc.

4)The factory also supply tantalum, niobium, hafnium, tungsten material.

Quality control is considered as the lifeline to a company. Ningbo Galaxy has got ISO9001: 2000 certificate, manufacture license of special equipment, manufacture license for pressure vessels, manufacture license for titanium material by Chinese government.

Ningbo Galaxy Industrical Trading Co., Ltd. Also has a special research institution for non-ferrous metal material, which is primarily engaged in researching titanium alloys used in aerospace and titanium material used in ship-building. Meanwhile, Ningbo Galaxy has achieved remarkable success in producing titanium/steel clad plates, nickel/steel clad plates and aluminum/copper clad plates.

WE BOER KING STEEL GROUP(Tianjin Boer King Steel Import and Export Co., Ltd )LOCATED IN SHUANGGANGINDUSTRIAL ZONE, JINNAN DISTRICT, TIANJIN, China. 30KM AWAY FROM TIANJIN XINGANG PORT, 8KM AWAY FROM TIANJIN AIRPORT.

WE SPECIALIZED IN PRODUCING AND EXPORTING CARBON STEEL SEAMLESS PIPES AND WELDED STEEL PIPES, BLACK AND HOT-DIPPED GALVANZIED, MEDIUM AND LOW PRESSURE BOILER TUBES, OIL CASING TUBING AND LINE PIPES, QUALIFY THE INTERNATIONAL STANDARD, SUCH AS API 5CT J55/55/N80/P110, API 5L/ASTM A53/A106 GRADE A/B, ASME A179/A192, DIN 2440/2448, BS1387, etc. SIZES AVAILABLE IN RANGE: 1/4"-48".

WE ACQUIRED THE CERTIFICATEDS OF API 5L&5CT, AND THE AUTHENTICATION OF ISO9001: 2000 INERNATIONAL QUALITY SYSTEM. VARIOUS KINDS OF OUR PRODUCTS HAVE BEEN IN GREAT DEMAND IN MORE THAN 20 COUNTRIES AND REGIONS, SUCH AS Saudi Arabia, United Arab Emirates, ISREAL, Egypt, Iran, Kenya, SOUTH American, etc. WE REALIZED A NEW LEAP IN PRODUCT QUALITY AND BUSINESS MANAGEMENT DURING OUR INSISTENT EFFORTS. FOR YEARS WE INSIST ON THE MANAGEMENT THEORY OF QUALITY FIRST AND CUSTOMER SUPREME, AND CONSTANTLY IMPROVING OUR QUALITY MANAGEMENT SYSTEM AND OUR PRODUCTS ACCORDING TO THE REQUIREMENTS OF OUR CUSTOMERS.

WE SINCERELY HOPE TO COOPERATE WITH FRIEND IN EVERY FIELD BOTH AT HOME AND ABROAD AND CREAT BRIGHT FUTURE!

Nanchang Bestway Cemented Carbide is located in Nanchang city, Jiangxi Province. We are with Shanghai in the east and Guangdong in the south, enjoying great convenience in transportation.

Our company is a professional manufacturer with high performance cemented carbide, including various of grades and sizes with standard or non-standard. Production of hard alloy and its finished production system has been formed. Moreover, the company is people-oriented, which collects with domestic and overseas latest technology. It includes research, analysis ad testing laboratory. With the strong technical force, advanced equipment and relable quality testing method, this can meet customer's requirement timely.

Our main products are as follows: Mines, oil column gear, welding blade, round bar, wire drawing die, cold heading die, lath seals, woodworking blades, serrated blades, milling cutter, reamer, rotary burrs and some non-standard ones. They are widely used in mining, petroleum, machinery, electronics, chemical, cutting and other industries. At present, the products are sold in domestic and overseas market.

In spirtit of reliablt quality, competitive price, thoughtful after-sales service, we sincerely hope to establish long-term mutually beneficial cooperation with domestic and foreign customers. You are warmly welcomed to inquire us!

Shandong Baowu Steel Group Co., Ltd. Located in Shandong, we have convenient transportation. Our company is a large-scale enterprise specializing in the production of seamless steel pipes, welded steel pipes, stainless steel pipes and stainless steel products. We mainly produce including stainless steel plates/coils and profiles, Steel plate, alloy steel plate, wear-resistant steel plate, Carbon plate, square tube, galvanized tube, non-ferrous metal, PPGI and PPGL and other materials. Our company also has cooperative factories, like TPCO, TISCO, ZPSS, Tianjin Iron and Steel Group, HBIS Group, and Steel, Shandong Iron and Steel Group. We have rich experience in foreign trade and have established long-term cooperative relations with many well-known foreign companies. Shandong Baowu Steel Group Co., Ltd. is one of the most famous stainless steel shareholders and service centers in the region, providing stainless steel products to various industries. As a leading stainless steel joint stock company and service center, Baowu Group has stainless steel sheets, stainless steel coils, decorative and industrial steel pipes, round bars and other stainless steels of different grades (SS304 304L 316 316L 321 310S 309S 310S 2205 904L etc. ) and sizes Products are specially stocked to meet the needs of the local industry and the international market. In 2008, the company established a state-of-the-art stainless steel service center with the following facilities: 01 10-wire cut length line: For cold rolled stainless steel coils. 02 6 cold rolling mills, 6 hot rolling lines and 6 polishing lines: Process the sheet into No. 4, HL, gold. 04 Super-mirror line: Process the sheet to a super-mirror finish. 05Have high-tech and self-operated export. There are 120 employees and 10 technicians, covering an area of 35, 000 square meters. The annual output is 18, 000 tons. Successfully implemented customer relationship management (CRM) in 2014.

Luoyang Combat Tungsten and Molybdenum Material Co., Ltd. Is located in Luoyang and is a joint-stock company with a registered capital of 50 million. The molybdenum metal in Luoyang area ranks first in Asia. With its abundant resources, Combat Company specializes in manufacturing and exporting tungsten, molybdenum, titanium, tantalum and niobium products. Combat has its own production plant, which has realized a complete production line from powder ->Rod (plate) ->
Plate or rod (line). Tungsten-copper alloy and high-density alloy are our best products, and we accept customized products. As a raw material supplier, we can control quality and price from the beginning, thereby saving a lot of costs, guaranteeing prices and ensuring the quality of products provided to customers. For stable quality and good service, our company has established a good corporate image at home and abroad. The company was rated as one of the top 20 star enterprises in China's molybdenum industry. We are willing to establish better cooperative relations with domestic and foreign customers. Our products have been exported to the United States, Britain, Germany, Russia, Italy, India and other countries and have won unanimous praise from customers.

Hangzhou Ualloy Material Co., Ltd is a high-tech enterprise which specialized in making all kinds of alloy strip such as high resistance alloy, low-resistance copper nickel alloy, precision alloy, FeCrAl alloy for exhaust purifier.

HangZhou Ualloy Material Co., Ltd have a full production line from melting, surface cleaning, rolling and slitting, full set of testing machine and can meet all kinds of technical requirement from customer. Our product is widely used in heating equipment, big steel mill, mineral, electrical equipment, food machinery, auto industry, aerospace industry. Our product not only is popular in domestic market, but also been exported to all over the world.

Nichrome strip and FeCrAl strip is our main product, espeically for dynamic braking resistor. The UALLOY100, 125, 128 was popularly welcomed all over the sea.

Our company aims to be the best-quality alloy strip producer in the world. We insist on developing the more advanced alloy strip technology, to serve all the customer, improve people's living level, make a more green earth in the future.

Shandong Quansheng Material Technology Group Co., Ltd. is an enterprise engaged in the research of titanium and its alloys, zirconium and its alloys, tantalum, niobium, Hastelloy, Inconel alloy, Monel alloy, superalloy, pure nickel and its alloys, tungsten, molybdenum, copper tubes, copper coils, copper plates, copper busbars, lead plates, lead glass, aluminum tubes, aluminum plates, aluminum rods, aluminum pattern plates, aluminum square tubes, stainless steel plates, stainless steel pipes, stainless steel rods, stainless steel strips, stainless steel profiles, stainless steel wires, stainless steel pipe fittings, stainless steel forged flanges, I-beams, angle steel, channel steel, H-beam, rebar, round steel, flat steel, seamless steel pipes, steel plates, steel coils, color-coated coils, corrugated sheets, galvanized products, high-speed guardrails, The products cover plates, strips, profiles, bars, wires, pipes, pipe fittings, forged flanges, etc.

The factory covers an area of 120, 000 square meters, and now has a series of production equipment such as vacuum induction furnace introduced from the United States, vacuum self-consumable electric arc furnace produced in Germany, 2800mm four-high reversible rolling mill, vacuum annealing furnace, etc., and has more than 100 sets of various testing instruments, the main equipment are: American nondestructive testing system, spectrum analyzer, carbon and sulfur tester, universal testing machine, ultrasonic testing system, fatigue testing machine, etc.

It can customize the production of any size plate within 2.6m*16m, and the maximum length of a single pipe can reach 15m.

We have advanced technology and equipment, mature processing concepts, professional scientific research personnel, and experienced foreign trade personnel. Our aim is quality first, reputation first. Welcome friends from all over the world to visit.

Dongguan Bangteng Hardware Electronics Co, Ltd. located in Nuozhe Industrial Park, Liuwu Management District, Shjie Town, Dongguan City, Guangdong Province, is a manufacturer of hardware products &umould for electronic components. Specializing in the production of battery pack connector and battery pack accessories; High and low frequency transformer clips, planar transformer copperprecision terminals connectors and other precison hardware products, etc. Our products are widely used in high-power battery packs. Energy storage battery packs, new energy vehicle power battery packs Solar street light batteries and military battery packs. Modern communication equipment and household appliances;

Adhering to the business motto of " the first is qualtythe inportance is credit. The management is precise, and the serviceis honest", we have established a long-term and mutually beneficial business relationship with large and medium enterprises. We cooperated with them in developing and designing products so that we can advance together. We have won good valuation from our customers for our quality, technology and good service.

With our advanced technology and experience, we are able to design and develop new product according customer' s requirement, or making according the samples, and process all kinds of parts for customer such as hardware stamping parts, connector terminals and the similar parts etc. To meet the customers and market.

Shandong Meide Import and Export Co., Ltd., founded in 1997, is located in Liaocheng City, Shandong Province, the largest steel logistics center in North China. It focuses on the production and sales of copper, aluminum, titanium, special steel, mold steel, alloy steel, and general mechanical equipment for steel processing. The product range is mainly extended to five series of plates, strips, tubes, rods and profiles. It has passed the ISO9001: 2000 quality system certification, and its products have passed the SGS, ROSH, TUV and REACH certification. It has cold rolling, hot rolling and other production lines. Such as heat treatment chemical analysis, metal halide detection, physical detection, non-destructive detection and other detection equipment and detection technology, and imported physical and chemical detection equipment full-spectrum direct-reading spectrometer, which can quickly and accurately analyze various metal materials. It is produced according to American ASTM standards, Japanese JIS standards, German DIN standards, British BS standards and other standards. At the same time, we can customize and develop new products according to the actual application of customers, and provide products according to different cost and performance requirements. The company has cooperative relations with more than 20 well-known steel mills in China and is the sales and export agent of famous local steel mills in Shandong Province. With rich and professional marketing experience of steel products, our company has become a reliable bridge between overseas customers and domestic steel mills. We are committed to strict quality control and considerate customer service, adhere to quality first, fast delivery, and our experienced staff can communicate with you at any time to ensure full customer satisfaction. We also welcome OEM and ODM orders. You can discuss your purchase requirements for the current product with our customer service center, or provide customized help for your application. It has established modern large outdoor warehouse and indoor warehouse, with 20000 tons of goods in stock. Its customer base covers all provinces and cities in the country, and has more than 100 long-term stable cooperative customers. We sincerely welcome friends from all over the world to visit our company. We look forward to establishing business relations and personal friendship with you.

ZYT Co., Ltd. is a professional manufacture and supplier of raw material, electronic products and water filers which have been widely used in PowePlant, Petrochemical and energy industries.

As a preeminent provider of a diverse range of Raw Material Products, encompassing Steel, Aluminum, and Copper products in various forms such as coils, sheets, pipes, profiles, fittings and flanges. Furthermore, we offer comprehensive Processing and Cutting services tailored to meet your exact needs, including horizontal and longitudinal cutting, laser and waterjet cutting, welded pipe processing with pipe fittings (tees, elbows), explosive composite plate fabrication, and forging and casting customization.

ZYT headquartered in the vibrant Shijingshan District of Beijing, China, our strategic warehousing facilities are located in Jiangsu, Shandong, and Hebei provinces, ensuring seamless logistics and efficient delivery nationwide and globally. With extensive experience in the domestic and international steel product supply market, we have established a strong reputation for reliability and quality.

Recognizing the burgeoning potential of new energy, ZYT has established a dedicated Department of New Energy, specializing in cutting-edge products within this sector. Our portfolio encompasses ESS & EV Battery, Energy Storage System, Photovoltaic Solar Panels, Solar Hybrid Inverters, Integrated DC Chargers, Community Charging Networks, and a myriad of Electronic Components.

We warmly welcome overseas clients, EPC contractors, end-users, and all stakeholders seeking reliable partners and exploring solutions.

Wuxi Ge Ming Sheng Steel located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL), Zhangjiagang (ZPSS), Ningbo (BAO XIN), KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transportation., Wuxi become the biggest stainless steel sheet, plate and coil supply Centers in China. Jiangsu Mittel Steel Industrial Limited was established in 1998 years. As one of the largest stockists and manufacturers of industrial grade Stainless Steel products and derivatives in Wuxi, We keep a stock of 50000 tons every month, so we can delivery goods in fast time.

Our company supplies cold/hot-rolled stainless steel sheets, stainless steel coils and stainless steel Plate to many steel factories from athome and abroad, including Shanxi Taigang Iron& Steel CO, . Ltd (TISCO)Zhangjiagang Pohang (ZPSS), Shanghai BAO STEEL, Ningbo Baoxin and steel factories in Taiwan area, Mainland Chinese and foreign countries and regions.

Our long-term business lines are 201.202.304(1.4301). 304L. 316.316L(1.4404). 430.409L, 309S, 310S(1.4845). 317L. 904L. S31803(1.4462). S32750. S32760, Finish: 2B, BA, No. 1 No. 4, HL, 8K and so on...Meanwhile, our company is also engaged in the long-term supply of homemade & Imported medium and thick plates, galvanized and carbon steel products.

Adhering to the principle of "quality first and customer foremost", our company will offer long-term service to nationwide manufacturers of household appliances, elevators, tableware, ornaments, tanks and machines. We can offer precise frosted wiredrawing, 8K mirror finishing and skim board oil-abrasion of various specifications at any time. The precisely-processed products will meet your requirements for high quality. Our company is a modern enterprise integrating distribution and storage.

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

CHANGSHA EASCHEM is a professional company of marketing and distributing rare earth materials under EASMATERIAL GROUP of three factories and one research center from China since 2013.

We are producing and providing

Rare Earth Oxides(CEO2, Er2O3, Y2O3, Dy2O3, EU2O3, Gd2O3, Ho2O3, La2O3, Lu2O3, ND2O3, Pr6O11, Sm2O3, Tb4O7, TM2O3, Yb2O3, Sc2O3);

Rare Earth Fluorides(YF3, CeF3, LaF3, DyF3, ErF3, EuF3, GdF3, HoF3, LuF3, NdF3, PrF3, SMF3, TbF3, TmF3, YbF3, ScF3);

Rare Earth Metals(CE, Dy, Er, EU, Gd, Ho, La, Lu, ND, Pr, Sm, Tb, TM, Yb, Y, Sc, LaCe, LaCePrNd, PrNd, HoFe, GdFe, DyFe);

Rare Earth Salts(

Rare Earth Carbonates of CE2(CO3)3 La2(CO3)3, Dy2(CO3)3, Y2(CO3)3 etc,

Rare Earth Chlorides of CeCl3, LaCl3, DyCl3, SmCl3, TbCl3, YCl3, ScCl3 etc,

Rare Earth Nitrates of CE(NO3)3, La(NO3)3, (NH4)2CE(NO3)6, Y(NO3)3 etc,

Rare Earth Acetates of CE(AC)3, La(AC)3, ND(AC)3, Y(AC)3 etc,

Rare Earth Hydroxides of CE(OH)4, La(OH)3, Y(OH)3 etc,

Rare Earth Sulfates of CE(SO4)2, CE2(SO4)3, La2(SO4)3, (NH4)4CE(SO4)4 etc);

Rare Earth Master Alloys(AlSc2, AlEr5, AlLa10, AlCe10, AlY5 etc);

Other Rare Earth Materials and Salts (

Rare Earth Hydrides of GdH2, DyH2, TbH2, YH2 etc,

Rare Earth Borides of LaB6, CeB6 etc,

Rare Earth Nitrides of CeN, YN, ScN etc,

Rare Earth Bromides of CeBr3, LaBr3, YBr3, ScBr3 etc,

Rare Earth Oxalates of CE2(C2O4)3, La2(C2O4)3, Y2(C2O4)3 etc,

Rare Earth Acetylacetonates of C15H21O6Tb, C15H21O6EU etc,

Rare Earth Phosphates(RePO4),

Rare Earth Perchlorates Re(ClO4)3,

Rare Earth Trifluoacetates Re(CF3COO)3,

Rare Earth Isooctanoates Re(C7H15COO)2,

Rare Earth Stearates,

Rare Earth Tartaric Acids,

Rare Earth Citrates etc)

In stock or custom-made way.

"Good Quality, Heart Service", EASCHEM is always there for you, Welcome!

We are your reliable supplier in nonferrous metals, specializing in manufacture molybdenum, tungsten, tantalum, niobium, zirconium, and their alloys such as MoLa, TZM, MoCu, WLa, WNiFe, WNiCu, WCu, etc.

We produce a wide range of different forms including plate, strip&foil, bar, wire and precision machined parts such as crucibles, fasteners, ion implantation parts, MOCVD&MBE&MPCVD parts, balancing weights, radiation shieldings, etc. Also one of our major is hot zone of high temperature furnace and its accessories like heating elements, shieldings, shelves&trays, annealing&sintering boats, electrodes, as well as parts made of molybdenum, tungsten, tantalum, and their alloys.

The industries we supported include vacuum coating, electronics&semiconductors, high temperature furnace, photovoltaics, glass and ceramics, medical equipments, electric light sources, machinery, chemical, aerospace and car industry, covering more than 60 countries throughout the world.

Our continuing goal is to supply high quality products, service, and support to our customers at competitive prices. At Belong Matels, products are supplied with satisfaction guaranteed, whether conforming to standards such as ASTM or modified to custom specifications. Which brings us to our mission: Developing long-lasting, mutually beneficial relationships with our customers.

No order is too big or too small, if you have any requirement, contact us at +86 917 3228322 or send your enquiry for quotation within 24 hours

Shandong Baotai Steel Co., Ltd. is located in Jinan, the capital of Shandong Province. Mainly produce stainless steel, carbon steel, galvanized steel, PP G I, PP G L. Our team has been dedicated to the steel industry for 20 years. The company has established long-term and close cooperative relations with well-known domestic iron and steel enterprises. At the same time, the company's annual stock reserve exceeds 200, 000 tons, which can guarantee a short delivery time. Baotai Steel provides services to domestic government construction projects, Chinese listed companies and state-owned enterprises and other large enterprises. At the same time, Baotai Steel has long-term cooperative relations with many countries in Russia, the Middle East, Southeast Asia, South Africa, South America and other regions. With high-quality products, low prices and high-quality services, it has been highly praised by customers. Customers from different countries signed agency agreements with Baotai Iron and Steel and became Baotai Iron and Steel's agents. Baotai Steel's service team provides you with professional and high-quality services online 24 hours a day. At the same time, Baotai Steel also insists on customer-centric win-win, and looks forward to becoming a high-quality enterprise you can trust.

Lingchuang Steel Group Co., Ltd., located in Jinan City, Shandong Province, China, is a leading enterprise specializing in the research, production, sales, and distribution of steel products. With advanced production facilities and modern integrated equipment, the company is committed to providing high-quality steel products to customers worldwide, earning their trust and confidence.

Main Products

Lingchuang Steel Group primarily manufactures the following types of steel and alloy products:

Stainless Steel: Including stainless steel sheets, pipes, bars, and various specifications and grades.

Carbon Steel: Encompassing structural and alloy steels suitable for a wide range of industrial applications.

Galvanized Steel: Providing steel treated with hot-DIP or electroplating processes, offering excellent corrosion resistance.

Copper and Aluminum: Supplying copper, aluminum, and their alloys for electronics, construction, and manufacturing sectors.

Various Alloys: Customizing specialty alloy materials based on customer requirements to meet specific project specifications.

All products are manufactured according to national standards such as GB, international standards like ASME/ANSI, MSS, DIN, EN, and others. Additionally, the company specializes in producing non-standard steel products based on detailed drawings provided by customers.

Customer Base

Lingchuang Steel Group's products are widely used in the following industries:

Oil and Chemical: Supplying high-strength, corrosion-resistant steel for pipelines, tanks, and equipment manufacturing.

Natural Gas: Providing materials compliant with safety standards for natural gas extraction and transmission.

Fertilizer: Offering corrosion-resistant and high-temperature materials for fertilizer production equipment.

Power Plants: Producing structural steels and alloys suitable for boilers and power generation equipment.

Metallurgy: Supplying high-strength and wear-resistant materials for metallurgical equipment and processes.

Shipbuilding: Providing steel certified by classification societies for shipbuilding and maintenance.

Papermaking: Supplying corrosion-resistant steels for pulp production and processing equipment.

Urban Construction: Providing durable structural materials for building structures and infrastructure.

Technological Advantages and Service Commitment

Lingchuang Steel Group leverages robust technical capabilities and extensive industry experience to continuously enhance product quality and technological innovation. The company strictly controls and manages product quality according to ISO quality management systems, ensuring that each batch of products meets or exceeds customer technical requirements and expectations.

Moreover, Lingchuang Steel Group values long-term partnerships with customers, providing comprehensive solutions and ongoing support through timely delivery, professional technical assistance, and a well-established after-sales service system. This commitment aims to foster industry development and progress collaboratively.

As a leading steel enterprise in China, Lingchuang Steel Group will uphold the business philosophy of "Quality First, Customer Supreme, " continuously improving product quality and service levels. The company remains dedicated to providing reliable steel products and solutions to global customers, striving together towards new heights in industrial development.

Shanghai Changjin Metal Product Co., Ltd, as one of the subsidiaries of AMHG, the marketing products including: Pipe, plate, bar, coil and etc of stainless steel, aluminium alloy, alloy steel and copper.

Asian Metal Holding Group Co., Ltd(hereinafter to be referred as AMHG), headquarter located at Hongkong invested and founded by Hongkong Lin Consortium in the year 1981, is the leading and modern integrated operator of metal materials in China.

At present AMHG has invested and held 16 wholly-owned or joint venture subsidiaries. We keep close relationship with over 500 suppliers and over 2000 terminal customers and commit ourselves to be the leader of China metal material service enterprise in the circulation field.

Four main business fields of AMHG:

1)Imp. & Exp. Of minerals,

2)sophisticated process of metal materials,

3)domestic and international trade,

4)derivative services of metal material supply chain(Eg: Agent procurement, agent sale, supply chain finance and etc. )

Business model of AMHG:

1)Sourcing materials based on demand and proximity: Keep long-term strategically cooperative relationships with steel mills, source materials via all-round channels, provide advisory consulting of materials selection, introduce new products, agent for procurement and sale.

2)CNC, marketing and delivery based on demand and proximity: Provide CNC, stock, logistics through over 200 supporting enterprises. Increase additive value after processing.

3)Integration the demand from customers: Provide VIP finance service, build a tripartite partnership between Changjin, bank and customers, .

AMHG successfully established a modern service system of metal materials processing, warehousing, distributing, retailing & wholesaling at the main collection and distribution center at Shanghai, Guangzhou, Tianjin, Hangzhou, Qingdao, Ningbo, Wuxi, Foshan and etc. Standard workshop covers over 300, 000 square meters and own over 100 modern production lines, AMHG processing center can provide the service of shearing and processing for the terminal customers, also provide warehousing and delivery for the steel mills, logistics companies and trade companies. AMHG direct their endeavors to the intensive cultivation of metal materials supply-chain to lead the development directions of metal material industry through continuing mode innovation and organization change.

Base on our profound understanding of supply system and our professional team,

We strive to integrate and optimize all resources we have, provide the customer with the whole solution but not only high quality products at reasonable price, one-stop prominent service is our goal.

Our Mission: Let value go on!

Nanjing hengjie industrial Co., Ltd. Was founded in 2010, which is an ISO9001: 2000 certified company and has been continually awarded by the local government. The factory is a profession to produce all kinds of special steel profiles. Custom special shape profile with any material can be offered, triangle, oval, half round, hexagon, D, I, T, L, Z, trapezoidal, rectangle, chamfered, wedge shaped bar / wire, cold drawn steel bar, linear guide block and rail, oil tempered wire, monel / hastelloy / inconel / nickel / incoloy / stainless steel / alloy steel / carbon steel wire, strip, bar, tube and plate. In order to further satisfy the needs of customers, we independently research and develop the irregular steel products which are widely used in various kinds of mechanical equipment. Have established a long partnership with USA, France, Germany, South American, Australia, Saudi Arabia, Southeast Asia. Spain, Korea, Japan etc. We take "quality first" as company marketing way, "create future, insist perfection and particularity" as operation principle. We believe: Our product and service will bring you much better development. Enterprise mission: Create value for customers, create interests for shareholders, create the future for our staff members and create a better society. Operation principle: Create future, perfection and particularity. Strategy goal: Achieve the most competitive spring steel enterprise. Enterprise spirit: Integrity is basic, innovation is soul, Learning is no end, Fight for top class forever.

Greelife (GL) found in 2010, and it has grown to become a leading supplier of powdered injection molding products and provides custom-engineered metal injection molding (MIM) components to customers in a variety of industries around the world, such as consumer electronics and IT sectors, medical and orthodontic fileds and automotive industry. Metal injection molding (MIM) is a proven, innovative powder metallurgy technology that offers the capability of mass producing complex-shaped metal parts consistently and reliably. GL pioneered the manufacture of steel parts with metal injection molded components and is at the forefront of metal injection molding technologies and base on a core team comprised of metallurgists, designers, engineers, technicians, toolmakers and the trained assembly members. In addition, we using best in class machinery CNC compaction technology for the precision parts.

With the advanced engineering and production capabilities GL have served the metal parts for customers from Europe, Canada, The United Stated, Brazil, Russia, Japan and our China native partners. And the metal injection molding (MIM) parts application in the fileds, GL is privileged to accompany you as a partner in the study and production of your sintered parts.

Anyang Hongshun Industrial Co., Ltd. is a professional ferroalloy manufacturer, the main products include multi-alloy series products and other metallurgical auxiliary materials. Focus on medium and low carbon ferromanganese and silicon metal products R & D, production and sales.

The company has more than 200 employees, covers an area of more than 280 mu, construction area of 50, 000 square meters, fixed assets of 190 million yuan. Under the unremitting efforts of the company's leaders and all employees, it has developed into a well-known enterprise in the same industry and made due contributions to the development of China's iron and steel industry.

Our main products are ferromanganese, metallic silicon, silicon carbon alloy, cored wire, ferrochrome, silicon manganese alloy, silicon carbide, ferrosilicon, silicon aluminum barium calcium, silicon barium calcium, etc. The company is also engaged in the export business of refractory materials and other metallurgical products. Products can be processed according to customer needs.

We have complete specifications of ferro alloy products, which can also be processed according to customer requirements. Our main production lines include:

Seven sets of intermediate frequency furnaces-Annual capacity about 12, 600 mts.

Two sets of refined furnaces-Annual capacity about 48, 000mts.

Two sets of submerged arc furnaces-Annual capacity about 145, 000 mts.

Three sets of cored wire production lines-Annual capacity about 54, 000mts.

If you have any questions about Ferro alloy, welcome to leave a message or contact us in other ways. Our sales manager will reply within 24 hours!

Zhuzhou Jinding Cemented Carbide Co., Ltd. Was established in 2004. Our factory is a private limited liability company. Our registered capital is RMB5000, 000. We are engaged in the research and development of tungsten carbide and are engaged in production of tungsten carbide. Our factory is located in the national high-tech development zone. Our factory is high-tech plant of Hunan Province. Our new type of cold heading technology and cold punching technology of our special big grain of tungsten carbide are listed as the national torch program projects by our government. The area of our factory is 3500 square meters. In our factory, there are more than 60 staff members, among whom 40% are professionals and technical personnel. Our company insists on the spirit of "unity and cooperation, development and innovation". Our company staff members work hard with the spirit of "team-work", and are full of vigor and vitality. Our factory passed ISO9001: 2008. We have independent export and import rights of tungsten carbide products.

Our factory has the annual output of 200 Tons with our production lines. Our technology is mature to make tungsten carbide products. There are still more than 90% of our staff members who joined in our factory in 2004 when our factory has been established. We have only 10% turnover of staff. Our fixed assets is more than RMB10, 000, 000. Our factory has internationally advanced 60-Ton fully automatic high precision DOST press machines, vacuum dry mix equipment, degreasing sintering furnaces and so on. Our main products are tungsten carbide cold punching moulds, tungsten carbide buttons for mining, tungsten carbide goods for tamping of railway foundation, tungsten carbide strips, tungsten carbide rods, tungsten carbide plates, and so on. Our sales volume was RMB40, 000, 000 in 2011, and we paid RMB1, 000, 000 as the tax to our government. We will invest RMB6, 000, 000 in adding machinery in next 3 years. We will try our best to improve internal management to create a provincial-level enterprise technology center. Our target sales volume is RMB80, 000, 000 in 2012.

Our aim is "to let more and more customers in the world choose and love our tungsten carbide products"

Changsha Yuxin Steel Co., Ltd is a company owned import and export rights by government. We are the professional manufacturer and exporter of special steel and steel solution provider. We worked in steel industry more than 15years, always to provide high quality, good price and sales service for customers.

Our main products.

Raw material in steel round bar, steel flat bar, steel plate, steel pipe in carbon steel, alloy steel, tool steel, mould steel, bearing steel, stainless steel, super alloy, special alloy.

And roller, shafts, cylinder, steel plank, steel rings, by casting, rolling, forged. Forgings according to drawings.

We also provide steel machinery processing service, steel cut, steel milling, heat treatment, and mould base by CNC.

Laser cut plate, Laser cut pipe, we have10 sets of 6KW laser cutting machine, 1 set of benders, 1 set of leveler machine for plates. We can make stainless steel box, stainless steel enclosure. OEM according to customers.

Welcome to visit us and audit our factory. We insist on Quality First, Credit Frist.

Hope we have chance to cooprate!

Established in 2007, Tianjin Tiangang Weiye Steel Tube Co., Ltd. is located in Tianjin Beichen District. We are one of the biggest steel products supplier by the Coast of Bohai Sea. Tianjin has Already formed a three-dimensional comprehensive transportation network. Our geographical Position is superior and transportation is very convenient.

We are one of the biggest supplier for steel products with a 80, 000-square-meter warehouse, Covers an area more than 120, 000 square meters in size, and well over 50 million USD in assets.

Our main products including stainless steel pipe, stainless steel plate, stainless steel bar, Seamless steel pipe, low temperature steel pipe, alloy steel pipe, boiler pipe, carbon steel plate, Alloy steel plate, pipe fitting, copper products and nickel products. Fatory has the most advanced Production equipment which guarantee the most advantageous product quality. Based on highly Quality products and best service, we have develop clients all round the world, our products are Widely used in industry and construction in USA, UK, Indonesia, Singapore, Korea, Viet Nam, Canada, Indonesia, Thailand, Brazil, Holland, Ireland, Germany, India, Iran, Dubai, Iraq, and so on.

Our goal is offer the best quality products with the lowest price and best service. We believe that Our company will have a speed develop with the support from both at home and at abroad.

We warmly welcome and looking forward to have a nice cooperation with company both home And abroad.

Located in the Economic and Technological Developing Zone of the "Kingdom of Rare Earth", Ganzhou City, Jiangxi Province.

Ganzhou Wanfeng Advanced Materials Tech. Co., Ltd. is a high-tech enterprise specialied in processing and marketing of rare earth materials. Established in 2011, our company has the complete industrial chain of rare earth R& D, production, testing, sales and services. With abundant raw materials and advanced processing & Testing equipmens, we can provide sufficient, stable and high quality rare earth products. We can provide accurate and timely services according to requirements of customers, especially in choosing suitable products.

Our main products are rare earth polishing powder, rare earth salts (lanthanum carbonate, cerium carbonate, cerium ammonium nitrate, lanthanum chloride, cerium chloride, cerium sulfate, etc. ), rare earth oxide (lanthanum oxide, cerium oxide, praseodymium oxide, neodymium oxide, samarium oxide, europium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, holmium oxide, erbium oxide, thulium oxide, ytterbium oxide, lutetium oxide, yttrium oxide, scandium oxide, praseodymium-neodymium oxide, yttrium-europium oxide, cerium-zirconium oxide, etc. ), rare earth metals & Alloys (lanthanum metal, praseodymium metal, neodymium metal, samarium metal, terbium metal, dysprosium metal, yttrium metal, Pr-ND metal, La-CE metal, Gd-Fe alloy, Ho-Fe alloy, Dy-Fe alloy, etc. ), magnetic materials (ND-Fe-B), other rare earth functional materials (lanthanum hexaboride, etc. ), etc.

Our products are sold in the domestic and international markets (Southeast Asia, North America, Western Europe). With professional team, innovative technology, first-class quality, preferential price, efficient logistics and excellent services, we have won a high reputation among customers. Customer demands are source of our innovation, customer satisfaction will be the best return for our services. Our company has been always adhering to the "cooperation, competition, innovation, surpass" spirit of enterprise. Taking "quality first, honesty first" as our business philosophy, we are ready to provide our respectful customers with high quality products and excellent services.

Luoyang Mopei Tungsten& Molybdenum Material Co. Ltd is located in Luoyang molybdenum capital city, get close to molybdenum mine of Luanchuan Country, the molybdenum metal of Luoyang city ranks first In Asia.

With the help of this rich resource, Mopei Company specially produces and exports tungsten, molybdenum, tantalum, niobium& Titanium metal material and their alloy product.

Our main products as follows:

Tungsten product: Tungsten bar rods, tungsten wire, tungsten foil strip sheet and plate, tungsten electrode, tungsten copper alloy, tungsten carbide alloy, tungsten heavy alloy(WNiFe, WNiCu), Tungsten crucible/tube/disk/pipe, tungsten sputtering target, Tungsten ball, tungsten flytying beads, tungsten weight, etc.

Molybdenum product: Molybdenum wire, molybdenum bar& Rod, molybdenum foil strip sheet and plate, molybdenum copper alloy, molybdenum lanthanum(Mola), TZM, molybdenum electrode, etc.

Tantalum product: Tantalum wire, Tantalum sheet, Tantalum rod, Tantalum plate, Tantalum crucible, special shape and tantalum tungsten alloy etc

Niobium product: Niobium wire, Niobium sheet, Niobium rod, Niobium plate, Niobium alloy etc

Titanium product: Titanium wire, Titanium sheet, Titanium rod, Titanium plate, Titanium pipe, crucible

Mopei Company export since 2010, we have already have more than 11 years producing and exporting experience. With competitive price in the market and factory direct sales channel, we supply fast delivery and best after-sale service. Under our work team coordination and skilled approach, we have come into being a complete company with the advance management concept, and trustworthy product to seek development together, we are willing to provide the best products and services in resaonable price for all new and old customers, and sincerely welcome you to visit and guide our team

Rydmet is a famous privately operated enterprise specialized in researching and manufacturing Cemented Tungsten Carbides (Hardmetal, Hard Alloy, Widia) and its deep-processed products (Carbide Cutting tools)

Equipped with a wide range of advanced equipments, such as Sinter-HIP furnaces, Spray Drying Towels, TPA automatic Presses, etc., we are in a position to produce a series of quality Cemented Carbides for various industries and applications.

The major categories of our products are:

Extruded Carbide Rods, Blanks, Tubes, Gundrill blanks.

Carbide Bur Blanks and Redi-burrs.

Carbide Components ( sleeves, bushings, nozzles, balls, valves seat)

Carbide Buttons, Inserts

Carbide Cutting Tools (like endmills, burrs, reamers, drill bits,

Carbide Knives and Blades.

In order to add the value of our Carbide products and distinguish us from other our competitors, Rydmet have been investing a lot in both the equipments and technical staff, we have set providing Ultra-fine, High-hardness ( wear-resistance), High precision ( both standard and irregular components) carbide Parts, as our company's new direction in the future.

Carbide Abrasive Water-jet Nozzle (Mixing tubes, Focusing Tubes) is one of the most successfully developed products by ourselves independently.

We are now almost able to make 90% of the irregular carbide components we meet. Rydmet has built a good reputation for providing with excellent and cost-efficient products to their clients and the trade mark "RYDMET" is very popular both in domestic and abroad.

We hope that we can promote your success with the expertise, advantages, knowledge, time and energy of our sales and engineering staff.

Rydmet is always prepared to assist you in Carbide Grade selection and solutions to any issues that occurs in practical application of Carbide.

We are looking forward to your emails, calls, visits. Welcome!

EB China specializes in the development, design, production, domestic and foreign marketing and import and export of heat-resistant, wear-resistant, high-temperature alloy casting and forging products and related machinery and equipment.

The main product materials include: Cobalt-based alloy, nickel-based alloy, heat-resistant alloy steel, wear-resistant alloy steel, high-chromium cast iron, nickel hard cast iron, high-manganese steel, aluminum, copper, titanium, zinc and other non-ferrous alloys. The registered capital of the company is 13.14 million Chinese Yuan.

EB China attaches great importance to technological innovation and research and development, and has a number of patents. The company has a total of 21 scientific and technological achievements. Among them, we have 14 Utility Model patents, 5 Software Copyrights and 2 invention patents. These scientific and technological achievements have been internally transformed and applied to the company's wear-resisting, heat-resisting, corrosion-resisting and machine product innovation, production process improvement and production equipment upgrading. The company attaches great importance to the establishment of system standards, in strict accordance with the ISO management system standards to steadily promote research and development, manufacturing, sales business system. At present, the company has passed the ISO9001: 2008 Quality Management System Certification, ISO14001: 2015 Environmental Management System Certification, OHSAS18001: 2007 Occupational Health and Safety Management System Certification, and passed the GB/T29490-2013 Standard Intellectual Property Management System Certification.

Qingdao Liange Special Steel Co., Ltd. is located in coastal and port city, qingdao, which well-known throughout the country with good reputation, high-quality products, strong strength and low price. Our company has been engaged in domestic trade for more than ten years and has rich trade experience. In 2014, we opened up the market to foreign countries. Our company is a company integrating processing and operation. Now we have more than 10, 000 tons of inventory and more than 800 specifications. These products are suitable for engineering, coal, textile, electric power and other industries. The company has strong capital, quality guarantee and convenient transportation. Since its establishment, it has been adhering to the management policy of "survive by quality, develop by product, cooperate with credit, and win customers with service", and has gained the reliance of colleagues from all walks of life. Our main products: Carbon/alloy steel coil/pipe/plate/bar, stainless steel coil/pipe/plate/bar, Galvanized / Galvalume steel coil/pipe/plate, color coated coil/plate, roofing sheet, aluminum coil/pipe/plate/bar, leas sheet, ect.

Professional compound wire manufacturer, sincere 2008.

Changzhou Capa New Materials Co., Ltd. is a leading manufacturer and supplier to the wire cable and electric industries, specialized in its high quality material, competitive prices and excellent service.

We offer entire solution for wire and cable industry and for the conductors insulated material, braid shielding material. Our main production is copper clad aluminum (CCA)wire, CCAM wire, copper clad steel (CCS) wire, aluminum alloy wire, enameled aluminum wire, enameled CCA wire, Tinned wire, Galvanized steel wire. Our materials can be used in all kinds of cables, transformers and motors manufacturing process.

Our company aims at reducing the customer's cost by upgrading our products and continuously researching and developing new products. And we continuously bring out the new reliable new material, new workmanship and new technology to meet the light-weight requirement of copper clad aluminum wire in such areas as the electric appliances and electronic industry.

Upholding the principle of credit being the priority, good quality, long term cooperation and common development, our company is ready to be the excellent and reliable partner of your first choice.

Shandong Zhengde Metal Manufacturing Co., Ltd. is a company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, steel sections, steel pipes, heat exchange pipes, automobile exhaust pipes, anchor rods, steel wires, metal mesh, A large comprehensive enterprise of metal products including stainless steel, aluminum, copper, metal raw material billets, aluminum ingots, zinc ingots, magnesium ingots, lead ingots, etc. It has formed five production and sales bases in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers and 5 corporate technology centers. The products are exported to more than 50 countries and regions in the world, including North America, South America, Europe, the Middle East, Russia, Africa, and North America.

Company philosophy:

Quality first: Production and inspection in strict accordance with production standards;

Price advantage: Discount based on actual market price;

Transaction security: Client funds will not be lost;

After-sales guarantee: Customer's problems are our problems;

Long-term cooperation: Quality assurance, price advantage, and sincere service can last long.

If you encounter dishonest manufacturers during the procurement process, we can provide you with a professional legal team. Hope our cooperation is full of sunshine!

Welcome to the company for inspection and cooperation, and look forward to friendly cooperation with you!

Thank you for your support of our company. We are happy to receive your inquiry and will get back to you as soon as possible.

We are located in Luoyang city with molybdenum capital, get close to molybdenum mine of Luanchuan Country. We mainly supply the Molybdenum Rods Wire Sheet Plate Tube Crucible, and other metal material, etc.

Tungsten Rods Wire Sheet Electrodes Tube Alloy, and Molybdenum Wire Sheet Rods Tube Crucible Alloy, Tantalum Wire Sheet Rods Crucible Tubes, Titanium Wire Sheet Rods Tubes Alloy, Tungsten Copper Wcu Alloy, W97 Tungsten Slotted Beads Fly Tying, W Alloy Metal Material.

With superior molybdenum raw material condition, we mainly produce Molybdenum(Mo), Tungsten(W), Titanium(Ti), Tantalum(Ta)& Niobium(Ni) metal and their alloy products.

Our main products

Tungsten product: Tungsten wire, tungsten rod, tungsten sheet and plate, tungsten electrode, tungsten copper alloy, tungsten carbide alloy, tungsten heavy alloy(WNiFe, WNiCu), Tungsten crucible/tube/disk/pipe, tungsten sputtering target, Tungsten ball, tungsten flytying beads, tungsten weight, etc.

Molybdenum product: Molybdenum wire, molybdenum bar& Rod, molybdenum sheet, strip, foil and plate, molybdenum copper, molybdenum lanthanum(Mola), TZM, molybdenum electrode, etc.

Titanium product: Titanium wire, Titanium sheet, Titanium rod, Titanium plate, Titanium pipe.

Tantalum product: Tantalum wire, Tantalum sheet, Tantalum rod, Tantalum plate, etc.

Guozhong (Shandong Iron and Steel) Group Co., Ltd. is located in Jinan City, Shandong Province, with more than 110 employees. With multiple processing equipment, we can provide supporting services such as cross cutting, slitting, CNC plasma cutting, matte (drawn film), 8K mirror, oil grinding, anti-fingerprint, embossing, punching, spare parts, etc., according to customer needs, Provide tailor-made integrated services to meet customer needs. The precision cutting equipment includes: Italian Nova stainless steel Kaiping production line, Taiwan Weitai stainless steel transverse shearing line, Taiwan Weitai stainless steel slitting line, large stainless steel cold and hot rolling flattening machine, slitting machine, etc.; Cutting equipment includes: Laser cutting machine

Our aim is to produce high-quality steel, and we have established a professional international trade service team. Our factory has obtained the national manufacturing license, passed the national 3C product certification, and obtained both international and domestic certifications, and has established good and stable cooperative relations with many customers at home and abroad. Main products: Plates, coils, pipes, and other products. With an annual production capacity of 15000 tons, we have many customers all over the world, and our products have been exported to many countries, such as Asia, Middle East, America, Europe, Africa, etc. And enjoy a good reputation at home and abroad. To establish a long-term business relationship with you. If you are interested in any of our products, please feel free to contact us for more information. We believe that we will be your best partner in China.

ABOUT US

ZhuZhou HongTong Tungsten Carbide Co., Ltd., specialized in production carbide products more than 15 years and located in the hometown of tungsten carbide in China. We are a high-tech joint manufacturer, covering 7000 Square meters facility. We have a professional QC team follow to the System of ISO9001: 2015, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output. We can manufacture all kind of tungsten carbide products. Our products are utilized in industrial, Military, aerospace, machining, metallurgy, oil drilling, mining tools, electronic communications, construction applications.

OUR PRODUCT

We mainly produce Tungsten Carbide Ball and Seat, Agriculture wear parts plates, Carbide tips, Carbide tiles, HPGR Stud pins, Brazed Inserts, Gripper Pads, Buttons, VSI Bars, Rod, Strips, PDC substrate, Weld on teeth, Bushings, Wire Drawing Dies, Heading Dies, Seal Ring, Nozzles, and other customized carbide products.

OUR QUALITY

We undertake stringent inspections managed by our quality control team. To make ensure the highest standard are achieved. We guarantee all our products. If you are not happy with what we have provided, we will issue a full refund on the return of goods.

OUR SERVICE

With globalisation making the world smaller, exporting to another country is our strength. We export to many counties throughout the world. We speak many languages, so will not find it hard to get what you require.

Shanghai Idefu Industry Co., Ltd engages in production, marketing and application services of fine chemicals, At present we are mainly one of professional supplier of optical brightener which can be used for the Detergent, Textile, Paper, Plastic and other related industries. Based on the professional RD team, advanced production line, comprehensive quality test equipment, our OBA has reach advanced level in similar products. We are oriented by requirement from customer, based on the best quality and good service, and we have gained the good reputation from our customers, in recent years we have established the long-term business (long-term long-term business)cooperation with some international companies. And we have exported our products to Middle East, southeast Asia, and European countries,

We are also a dynamic and customer oriented company specializing in the export business of chemical products, Adhering to the"customer first, forge ahead" business philosophy, we welcome customer to cooperate with us, and we promise to provide the products with best quality and provide the best service for you.

Shandong Dashi Jiushin Import and Export Trading Co., Ltd. is a comprehensive steel production and trading company integrating steel production, processing, import and export. The company was established in 2021. Its main products include stainless steel pipes, stainless steel coils, galvanized coils, color-coated coils, etc. It also involves non-ferrous metals such as copper pipes, copper plates, lead plates, and aluminum profiles. Through unremitting efforts in recent years, Dashi Jiushin has become an enterprise with a certain industry influence in China's steel foreign trade market.

In the process of development, Dashi Jiushin actively introduced advanced production equipment and technology, and closely combined steel production and sales activities to strive to maximize the economic value of all links in steel circulation, thereby promoting the win-win interests of itself and domestic and foreign partners, and also greatly supporting the healthy and rapid development of China's steel industry.

The company currently has more than 100 employees (including factory employees). Our staff team is a dynamic and professional team that brings together elites in the field of steel foreign trade. Team members work closely together to provide customers with excellent services and solutions with an efficient work attitude and innovative thinking. By constantly tracking market dynamics, mastering industry trends, and participating in professional training and international exchanges, we ensure that we can maintain our leading position in the fiercely competitive market.

Shandong Dashi Jiushin Import and Export Trading Co., Ltd. Aims to promote the healthy, fast and harmonious development of China's steel industry. We will be pragmatic and persistent in strengthening and expanding our brand. We will provide domestic and foreign customers with better quality products and more considerate services and promote the diversification and internationalization of Dashi Jiushin's steel industry.

* Shenzhen GYJ Aluminum Co., Ltd is a top three aluminum processing enterprises in Guangdong Province, the company has 20 years of experience in on-site production and management of aluminum products. Our team was established in 2013, and set up companies in Shenzhen, Dongguan and Guangzhou which are responsible for production and global sales in domestic and abroad. The company plant covers an area of 500 acres, with an annual comprehensive output of 500, 000 tons; We are in excellent geographical location with convenient transportation, which is adjacent to Hong Kong and close to multiple ports, now we have became one of the fastest growth and the most potential development of aluminum processing plants in China.

* The company has built a modern high-standard aluminum processing production line, with more than 1000 employees and a group of high-quality management personnel and professional technical personnel team. We focus on the R& D, production and sales of aluminum-based alloy materials and pay high attention to the technical innovation of the production line, and invests a large amount of money every year for equipments updating, do research and develop new products to improve efficiency and reduce costs, and help our customers improve their market competitiveness. The equipments are mainly from Germany, Italy etc, mainly equipped with 10 units of the continuous casting and rolling mill, 1 unit of 2300 hot rolling mill, 2 units of 2500 cold rolling mill, 8 units of 2100 aluminum foil mill, 30 sets of annealing furnace, 20 units of slitting machine, 2 units of transverse-cutting machine, 2 units of slitting machine, 2 sets of AVV stretch bending straightening cleaning milling for aluminum sheet and coil, 2 units of aluminum circle continuous annealing furnace, etc.

* Our main markets including more than 50 countries and regions in Asia, Europe, Africa, South America, etc. The quality of our products has been trusted by all of our customers, as The qualified rate of customers using GYJ products are about 8% higher than other similar products, which is greatly reduces the production cost of customers, and assisted customers in gaining a leading position in their market. Our main products cover aluminum sheet, aluminum coil, aluminum circle, and aluminum foil, widely used in the ceiling, lighting, signs, refrigerators, microwave ovens, audio equipment, automobile, high-speed railways, ships, yachts, industrial buildings, machinery and equipment, deep drawing products, flexible packaging, pharmaceutical packaging, food containers, yogurt heat sealing, power battery foil, aluminum-plastic hose, decoration, industrial insulation, electronics and construction and other fields etc.

* GYJ Aluminum always adhere to the innovation and development, adhering to the business philosophy of "Honesty& Sincerity, Creating Value for Customers, Win-Win", continuing and stably taking the road of high-quality development, adhering to high standards and strict management from raw materials to finished products to ensure quality. Our vision is to become a world-class technology innovative aluminum processing enterprise.

We are a multi-generational, family-run trading company that started in a small apartment in China in 1995. We now have multiple offices and ship to over 30 countries. We pride ourselves on our family values: INTEGRITY, HONESTY, and RELIABILITY. Through our long-standing relationships with Chinese manufacturers and our quality control systems, we ensure shipments are delivered on time and as expected. Our bilingual team (Chinese and English) works around the clock to serve our client's needs.

SINCERITY TRADE CARBON Co., Ltd, was founded in 2010, It mainly engaged in the export of series of carbon products used for Steel-making, Silicon-manganese smelting, Phosphorus smelting, Ferronickel smelting and Titanium smelting etc. Such as Graphite electrode, Graphite Rod, Carbon Electrode, Electrode Paste, Carbon Blocks, Core Wire, and Oxygen Core Lance etc.

We have a complete and International advanced level production line of graphite products (pressure, baking, impregnation, graphitization, automatic machining), and the advanced testing method; With the professional technology engineers and rich experience sales team, we are one of the leading carbon exporters in China and has rapidly won the acceptance and reliance of the customer globally. We have been exporting our products to USA, Germany, Japan, India, Spain, Russia and some countries in southeast Asia, etc.

We will consistently endeavor to deliver customers good quality materials and valuable after-sale service.

Our business philosophy is honest and trustworthy, do the best products, for customerstoclose, responsible.

Sincerely hope to cooperate with you to help you improve production efficiency, save your costs, increase your profits, and realize your dreams!

Dongguan SYS Industrial Co. Ltd (named SYS)

Our Managing Director/engineer, Mr. Kern Lee, started his business by developing and focusing primarily on measuring tools and gauges over last decade from 2012 years. We expanded focus on developing more efficient and precision gauges, air micrometer, master, SPC system over the last few years. With the market segmentation, we focus on more and more non-standard customization.

We are focusing in the field of Air micrometer/Air Gaging, mainly research, develop, manufacture, sell and export air micrometer, thread gauge, plug gauge, ring gauge, customized gauge, material tester equipment, cutter materials etc, it is widely used in the field of machinery, mold, metal, rubber, connectors, household appliances, printed circuit boards, and the industries of 3C, medical equipment, and so on.

Relying on the powerful technical ability, rich producing experience, excellent management method, first-class service and respectable credit, SYS has already become one of the main suppliers of measuring tools in China mainland. Up to now, our stable sales network has already been established in Austria, Turkey, Brazil, Mexico and other countries and regions. We will go on consummating our products line, and providing the professional instructions, timely services and qualified products with reasonable price and quick delivery to feedback the customers' kind supporting and trust. We are much appreciated for the customers that have purchased our products already, and we are very thankful for the valuable suggestions from the customers, it always helps us to improve our instruments effectively.

We are committed to make measurement more accurate and uncomplicated, and wish we could work together, success together from now on!

Our Mission

As employee owners, we are dedicated to designing and manufacturing flexible measuring gauge, including tools and materials, and to effectively serving our global customers.

Our Vision

To be a global market by creating innovative system solutions and delivering exceptional customer experiences. Provide a family culture where employees are appreciated, can grow, and will enjoy coming to work.

Our Products Range

Air Micrometer/Air gaging

Measuring Master

Measuring Head

Thread Gauge

Plug/Ring Gauge

Customized Gauge

Customized Tools

CNC Tools

CICEL vacuum company is Founded in 2003, a China national high-tech company. We are a mechanical engineering technology supplier dedicated to the research and development of PVD vacuum coating equipment and UV painting equipment, providing comprehensive and reasonable solutions for customers in the surface treatment industry. For a long time, CICEL has provided humanized PVD vacuum coating equipment and UV automatic spraying equipment for customers in more than 40 countries with its outstanding innovation ability and tenacious craftsmanship.

Our equipment applications are ubiquitous, Specially focusing on serving customers in various decorative coatings and functional coatings industries.

CICEL insists that matching the clear needs of customers with the most suitable customized equipment can create great value for customers and at the same time demonstrate our innovative service capabilities. Our main products are: Evaporation vacuum coating equipment, multi-arc ion vacuum coating equipment, magnetron sputtering vacuum coating equipment, optical electron beam vacuum coating equipment, Super hard film PVD coating machines for tools, DLC PVD coating machine, Automatic UV Painting line, and so on.

Technology research and development and innovation are the company's core competitiveness. CICEL uses its own advanced technology to conduct vacuum technology research and development with well-known China domestic universities. It has accumulated rich and mature experience in the field of PVD vacuum coating and UV coating technology. In the field of super-hard film layer and DLC coating equipment, many national invention patents have been obtained, and the entire product line equipment has obtained EU CE certification.

As an ideal company, we will continue to devote ourselves to our professionalism and provide high-reliability coating solutions. Let the vacuum coating technology bloom more bright light of innovation and benefit for all our customers in the world!

Shandong zehao metal materials Co., Ltd. is engaged in titanium and its alloys, zirconium and its alloys, tungsten, molybdenum, monel, inconel, inconel, nickel and other superalloy and corrosion resistant alloy research, smelting and processing enterprises. Products cover sheet, strip, profile, bar, wire, pipe, pipe fittings, forged flange and so on. The factory covers an area of 120, 000 square meters. Now we have vacuum induction furnace introduced from the United States, vacuum consumable arc furnace made in Germany, 2800mm four-high reversible rolling mill, vacuum annealing furnace and other series of production equipment. It can be customized to produce any size plate within 2.6m * 16m, and the maximum length of a single pipe can reach 15m. At the same time, we have more than 100 sets of various kinds of testing instruments, the main equipment includes: American non-destructive testing system, spectral analyzer, carbon and sulfur tester, universal testing machine, ultrasonic testing system, fatigue testing machine, etc. The company has more than ten years of export experience, the products are exported to the United States, the United Kingdom, Germany, Russia, France, Brazil, Japan, south Korea, India, Vietnam, Australia, the Philippines, Zambia, Indonesia and other countries

We're pleased to get your inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.

Our business has a situation here - all of our customers are brand. They are famous and well accepted by local customer. They commit to their consumer value. They are loved by people and never fail their expectation. Although they could be all different, they have one thing in common - they work with us.

Over 10 years of experience working with brand, we know exactly what is important to you and consumer in the steel pipes industry. We want to see you success. We want to work for hero. For the last 20 years, this is always the value we JIADE GROUP believed in. JD STEEL PIPE Located in Xi'an, China, is a company specializing invarious steel pipes. It is Established in 1991, covers a land area of 80, 000 square meters with a fixed asset of 200 million Yuan. Thanks of the concerted efforts of all its employees, the company has made satisfactory achievement. It passed the ISO9001 international quality system certification. With sector experience and knowledge, JIADE PIPE, always intend to be qualified and reliable supplier for our valuable customers.

The main production equipments of our factory include: A 180 automatic pipe rolling line, 3 sets of hot rolling-piercing mills, 16 interactive double-rod cold-drawing machines and a number of automatic rotary pointer, straightening machines, water-free annealing furnaces and auxiliary production equipments for surface acid picking and coating etc. Its physical and chemical bars can conduct various physical and chemical tests and experiments for steel pipes, with a full range of inspection measures, capable to meet various standard test and inspection requirements for steel pipes.

Its available in a variety of wall thicknesses, shapes, diameters and materials. In addition, they are manufactured in accordance with international standards, such as ASTM, JIS, DIN, BS, GOST, EN etc. To meet the requirements of our global clients. With features of reliability, durability, corrosion resistance and ease of use, our steel pipes and related products are increasingly popular in petroleum, gas, chemical, electrical power, shipbuilding, pharmaceutical, and many other filed.

Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.

Our factory in Jiangsu China as professional supply stainless steel bars, stainless steel sections, stainless steel pipe tube, stainless steel wire ropes, centrifugal casting pipes, UMCO50 pipes and CNC parts, fasteners, aims to supply our clients with the right even better quality than the clients requirements, even to create added value for customers around the world.

Our factory in Baoji supply kinds of titanium products, titanium bars, titanium wire, titanium plate and titanium sheets, titanium forging, titanium flanges and titanium pipe fittings, titanium tubes and titanium bolts and nuts, titanium fasteners, CNC parts

In order to guarantee the quality of our products, For years our staff have perfected our products to achieve faultless products and made honest business deals. The highest quality based upon on our experienced workmanship. We strictly conform to ISO 9001: 2000 international quality inspection standards.

We has focused on top quality stainless steel bars, stainless steel wire rope, stainless steel pipes, stainless steel flanges, stainless steel pipe fittings, stainless steel plates and stainless steel fasteners such as chemical anchor bolts and nuts, centrifugal cast tube and titanium products more than 10 years. Continuously strengthened technical facilities, improved on our inspection equipment and strengthened our staff training and overall management. As of now we have an integrated production system for smelting, hot rolling, cold rolling, forging, cold drawn, and finish machining products lines. High quality, reasonable price, excellent service, long terms cooperation. We have successfully exported to Russia, the Repubilc of Belarus, Kazakhstan, Ukraine, Romania, Austria, Sweden, Turkey, Mexico, Brazil, Chile, Argentina, Korea, Vietnam, Thailand, Indonesia, Singapore, Pakistan, Saudi Arabia, Iran, Dubai, England, Malaysia, Costa Rica, Egypt and so on.

From the raw material quality control, we use the direct-reading spectrometer to check the chemical components of the different grades of material, adding the visual investigation and checking the size, from the origin we control the material is right of the clients needs. Then following the technological process of production to produce, one step by step, checking and do the quality control, aim to supply the high/top quality products we export!

Our company supply kinds of Steel tubes, Stainless steel pipe, stainless steel tubes, seamless stainless steel pipe tubes, welded stainless steel pipes, small and large diameter of stainless steel tubes, heat--resist stainless steel and super alloy centrifuge casting tubes, UMCO50 alloy pipes, Centrifugal casting pipes and fittings, heat resistant steel centrifugal casting pipes, centrifugally cast stainless steel, centrifugal cast tube, cracking tube, reformer tube, stainless steel spun cast pipe, stainless steel wire ropes, titanium tube and titanium alloy bars, wires, plate, sheet, fasteners etc products.

High quality and favorable price.

We're pleased to get your Inquiry and we will come back to as soon as possible.

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.

Gansu Hehong New Materials Co., Ltd. (Hehong / HHP COPPER ) was founded by Jinchuan Group &

Jiangyin Hehong Precision Technology Co., Ltd. Which is a Branch of HuaHong Group (A-STOCK: 002645. SZ).

We are specializing at the production of Copper and Copper Alloy (Admiralty Brass/Naval Brass, Aluminum Brass, CuNi / Copper-Nickel) Condenser Tube, Fin Tube, Large Diameter Copper-Nickel Marine Pipe, Copper Alloy / Nickel Alloy / Titanium Alloy tubes, Forging Flanges, Tube Sheets and Pipe Fittings, Oxygen-Free Copper products and Railway Ground Wire/Cables, are widely used on Oil and Gas industry, Marine Ship building, Seawater Desalination equipments, Nuclear Power, Petrochemical, Steam Turbine, Pressure Vessels, Heat-Exchangers, Central Air-Conditioning and Railway Transit, etc.

And we wrote the National Standard of Copper / Nickel Alloy Seamless Tube / Pipe for Nuclear Power!

Main products of our company:

1)Seamless condenser and heat-exchangers tube series: Admiralty brass tube(HSn70-1/C44300/CuZn28Sn1As) and Aluminum brass tube(HAl77-2/C68700/CuZn20Al2As) etc.

2)Seamless copper-nickel alloy tubes for condenser and heat-exchangers series:

BFe10-1-1/C70600/CuNi10Fe1Mn, BFe30-1-1/C71500/CuNi30Mn1Fe and other copper nickel alloy tubes;

3)Seamless Brass tube and Arsenical brass tube series: C26130, C26000, C26200, C27000, C27200, C28000 and other copper-alloy tubes are widely used in sanitary ware, antenna, decoration, stationery, cooper standard component, etc.;

4)Copper pipe and tube series: T2/C11000/C102, TP2/C12200/C106 and other copper tubes.

5)Finned Tube and Refrigeration fitting series.

6)Through-Railway Ground Wire/High-Speed-Railway Ground Cable.

7)Bars and Forged flanges or machinery parts(copper alloy).

RICH BASE TECHNOLOGY Co., Limited was founded in 2007. We are professionals and forerunners in China's copper alloy R&D and manufacturing. Our management team has nearly 20 year's experiences in the field of copper alloy manufacturing.

The copper alloys we manufacture includes: Chromium zirconium copper(C18150), chromium copper(C18200), nickel silicon chromium copper (C18000), nickel beryllium copper(C17510, C17500), beryllium copper(C17200, C17300), Zirconium Copper(C15000, C15100), Tellurium Copper (C14500), Oxygen free copper (C10100/C10200), copper nickel alloys(C79200/C79400) etc...

The forms we manufacture include Round bars, square bars, rectangular bars, hexagonal bars, and different types of plates and sheets per customers' requirements.

We not only manufacture different sizes/shapes of copper alloys, we also manufacture finished products namely cap tips/contact tips/seam wheels/resistant electrodes, and other customized products based on our alloy, please contact us for your requirements.

With more than 20 years of copper alloy R&D and manufacturing experiences, coupled with a full range of manufacturing equipment. Our manufacturing process starts with raw materials and ends with customized shapes/forms of copper alloys. This enables us to supply high-quality copper alloys at very competitive prices.

Over the past years, we have earned a nationwide reputation for high-quality materials at competitive prices, quick deliveries, and superior services.

Our materials are being exported to Europe, North America, North-east Asia, South-east Asia etc.

Quality is an essential part of our manufacturing operations, our highly trained quality assurance team will do all necessary testings and inspections to make sure that all materials meet customers' requirements and expectations before shipping the materials to our customers.

Our copper alloys are mainly used in the automobile industry, aerospace industry, aircraft industry, appliance industry, consumer electronics, electronic equipment, electrical equipment, foundry products, industrial machinery, machine tools, resistance welding industry, telecommunication industry, transportation (high-speed train), etc.

Our materials are used by Volkswagon, Toyota, Hongda, Ford, China high-speed trains, etc.

For more information on our products, please visit our website: https://cqrbtc.en.made-in-china.com/

For any inquiry, please contact:

Contact: Steven Chang

Chenguang machinery &Electric Equipmemt Co., Ltd is comprehensive enterprise specialized in development, production, and marketing of ultra-hard materials.

In the year of 2018, we have two workshops, nearly 50 cubic press are used for growing HPHT diamond, One workshop, 7 sets CVD growth chamber, dedicated to the growth of CVD,

Advanced laser cutting machines, polishing and grinding machines are fully equipped, running day and night, so we can provide you with complete growth, cutting, polishing and grinding services for HPHT diamond and CVD diamond.

For quality inspection, we are equipped with complete and advanced testing instruments,

Such as particle size analyzer, static pressure analyzer, magnetic susceptibility

Analyzer, 200-1000 times electron microscope, infrared spectrometer, etc,

They are specially used to control the quality of diamond. We are the only

Designated testing center of Jilin University in Hunan Province. As a diamond supplier, We started to provide a wide range of diamond products and solutions for many well-known Chinese diamond tools enterprises since 1993. We grow together with China's diamond industry.

Since 2009, we have started to sell superior diamonds all over the world, including famous tool manufacturers, laboratories in colleges and universities, Diamond institute, Diamond dealers etc.

Our products are widely used in mechanical processing, oil and gas drilling,

Coal mining, construction, transportation, and some others are used in stone, automobile, cast iron, ceramic, hard alloy, fiber, semiconductor. Magnetic materials cutting and grinding area.

Shandong Xingtongda Steel Co., Ltd was founded in 2020 with a registered capital of 10 million RMB and has more than 20 years of experience in the steel industry. Our annual sales nearly one billion, about 300, 000 tons steel.

Our company is located in Liaocheng City, Shandong Province. We entered into a strategic partnership with Rizhao Steel, Jinan Steel, Laiwu Steel, Handan Iron and Steel, Anyang Iron and Steel, Maanshan Iron and Steel and other domestic large steel companies. Shandong Xingtongda Steel is the largest steel agent in Shandong Province, we also have ourselves steel manufacturing factory, and our stock always no less than 10, 000 tons.

Our company mainly engaged in: PPGI, galvanized steel, Roofing Sheet, AFP galvalume steel, stainless steel, steel pipes, H-beam, I-beam, angle, channel, flat steel, round steel, all profiles; Our own steel factory mainly produces seamless pipe, spiral pipe, square and rectangular tube, galvanized pipe and so on.

We always focused on the integration of resources, in line with the concept of win-win cooperation. With efforts of our staff we have the pleasure to serve the clients from more than 20 countries and areas, We earned good reputations from the clients without any claim. We finally become good friends and intimate partners with them.

Xingtongda steel regards moral integrity as fundamental, relying on advantages of resources, we will ensure the most reliable quality and very good prices.

Looking forward to be the best partner of different clients!

Chinasun International Industry Co., Ltd. is a group company focus on four industry business lines: Metal Materials, Isostatic press Machine, electronic&electric products and Glass Insulators. We have four professional leading manufacturers in the different industry lines:

1. Sichuan Suohaipu Isostatic Pressing Technology and Eqquipment Co., Ltd. Its a professional and leading manufacturer in design and producing Isostatic Press Machine, including Cold Isostatic Press(CIP), Warm Isostatic Press(WIP) and Hot Isostatic Press(HIP). Up to now, we have supplied more than 500 sets of the presses to the market.

2. Luoyang Sunrui Wanji Titanium Industry Co., Ltd. Its a professional manufacturer in Titanium material including Titaniumn alloys materials. Also we can supply different other mateirals including welding wire materials, nickle allos, stainless steel materials, Pure metals, Aluminum materials and etc. Now the capacity of titanium sponge is about 20000 MT per year and its the biggest producer for Ti materials in China now.

3. Yingjiao Electrical Co., Ltd. is a professional manufacture in electronic and electric products. The core products include switching & linear power adapters, battery chargers, transformers, LED drivers and completely customizable power solutions, designed for use in telecommunications, IT equipment, consumer electronic devices, security system, automation, medical equipments, smart home, LED lights and much more. Yingjiao owns independent high-frequency transformer and SMT workshops, along with 22 production lines for manufacturing & assembling, sell over 660 million power supply products in the past years.

4. SanRui Science and Technology(Jiangxi) Co., Ltd. Its the one of leading manufacturers in producing the various toughened glass insulators for high voltage and ultra high voltage electric transmission power line, high voltage support insulator for transmission power station, and DC glass insulators for electrified raiway and etc.

We sincerely hope to establish long terms business relations with customers worldwide in the line. Warmly welcome your inquiries, any ideas or suggestions, please feel free to contact us. Your attention and interests to our products would be fully appreciated.

Changsha Xinkang Advanced Materials Co., Ltd was established in 2014, we insists on taking scientific and technological innovation as the first core competitiveness, and focusing on customer needs, as well as continues to optimize the industrial structure. To today, the business scope has been expanded to four business division: Functional materials, material processing, R&D materials and experimental solutions. The industries we serve mainly include: Electronic, automobile transportation, R&D industry, medical equipment and green energy, etc. We passed the ISO9001: 2015 quality management system certification and ISO14001: 2015 environmental management system certification, and the self-developed products have been highly approved by customers. The business has been continuously extended from China to developed countries such as America, Europe, Japan and South Korea, etc.

In the future, Changsha Xinkang will adhere to the mission of "Gathering material technology, creating infinite future", and continue to innovate in the field of advanced materials, leading the development of the industry, and create a better life for mankind!

King Titanium is your one stop solution source for titanium mill products in the forms of sheet, plate, bar, pipe, tube, wire, welding filler, pipe fittings, flanges and forgings, fasteners and more.

We deliver quality titanium products to over 20 countries on 6 continents since 2007 and we provide value-added services such as shearing, saw cutting, water-jet cutting, drilling, milling, grinding, polishing, welding, sandblasting, heat treatment, fitting & repairing. All our titanium materials are 100% mill certified and source traceable from the melting ingot, and we can undertake to supply under 3rd party inspection agencies like SGS, LLOYD's, BV, TUV or any of client's approved TPI agency to further enhance our commitment towards quality. Our materials are accepted by machine shops, fabricators, prime contractors and sub-contractors for oil & gas, aerospace, automotive, chemical, medical, oceanographic, semiconductor, nuclear, recreational and other industries worldwide.

Our number one goal is to provide the affordable titanium you need and keep your business moving forward. No order is too large or too small to us, with our experience and knowledge in the metals industry, you can be confident in making King Titanium your first choice.

Zhuzhou Rivictory New Material Co., Ltd. is located in Zhuzhou City, Hunan Province, China, the largest tungsten carbide producing area in China. Our main products inclue: Tungsten carbide blanks, milling cutters, carbide rods, and epoxy resin insulators, non-standard and so on. Strictly Quality Check We have a professional Quality Check team follow to the System on ISO9001: 2008, Covering the raw materials incoming, production processes, finished products and packaging to ensure high quality products output. At the same time, the company has its own research and development team, which can customize products according to customer needs.

The company is committed to providing customers with the most suitable products and the best quality services and strives to promote our products to all parts of the world.

Adhering to the business philosophy of "integrity, diligence, unity, and service", the company has established good cooperative relations with domestic and foreign suppliers and customers.

We face customers and suppliers with integrity, abide by our commitments, and establish a good reputation in the industry; We face investors and partners with a responsible attitude, work hard, and work hard to ensure the company′ S investors and partners The security and value-added of funds; We have gradually formed a united, optimistic, active and energetic young team with the concept of sharing to ensure the long-term stable development of the company: We can provide you with a variety of imported and domestic chemical products of high quality and low price, Contribute to your development.

Our products have been exported to the USA, the UK, Germany, Spain, Italy, France, Greece, Turkey, Poland, Japan, Australia, New Zealand, the Middle East and Southeast Asia, totally more than 20 countries and regions. Many foreign clients with large orders have paid a visit to our company owing to our good reputation. Our company always persists in the spirit of "Forge ahead with determination, openness basing on sinserity" so as to serve our clients wholeheartedly. We express our sincere thanks to old and new clients, and we are looking forward to establish a long business relationship with customers worldwide.

With your support and help, we can achieve a win-win situation.

Baowu Aluminum (Shandong) Co., Ltd. is located in Dongchangfu county, which is the largest aluminum manufacturing county in north China. The factory is only one kilometer from the Jiliao expressway, which make our transportation more convenient. Our total investment is more than one billion yuan for two large factories. The factory covers an area of 120, 000 Square Meters and The company employs more than 500 staff, including over 60 engineering technicians. Our annual output capacity is more than 120, 000 tons of aluminium profiles. Baowu has been awarded the honorary titles of "China Patent Shandong Star Enterprise", "Key Enterprise of Shandong Architectural Profile Industry", "Famous Brand of the Province Construction Machinery Industry", "Shandong Famous Brand", "Well-known Trade Mark of Shandong Province", "China Energy-saving Product Certification", etc. Our company was appraised as a national medium-sized enterprise by the Agricultural Ministry of China in 2004. As a professional aluminum profiles manufacturer, we specialized in manufacturing building door and window, decoration, curtain wall and industrial aluminum profiles.

We have imported advanced manufacturing, checking and testing equipment of aluminum profiles from USA, Germany, Japan, Italy and Switzerland. With advanced checking and testing method and perfect quality guarantee system, our products are produced in strict accordance with the GB/5237 standard and have passed the qualification of ISO9001: 2000 International Quality Management System, ISO14001: 2004 Environmental Management System, 18000: 2001 Occupational Health Management System and 8000: 2001 Social Responsibility Management system. Meanwhile, we provides our customer with many kinds of finishes, such as sand blasting, polishing, brush, anodizing, electrophoresis, ceramic electrophoresis, sparkling electroporesis, powder coating, thermal insulation, fluorocarbon spraying (PVDF COATING), wood grain, etc. With stable product quality and perfect after-sales service, Baowu has been recognized as qualified supplier by lots of domestic famous enterprises such as Country Garden, Haier, Goertek, etc. Our aluminum profiles have been exported to many countries, such as USA, Brazil, Vietnam, India, South Korea, Australia, Germany, Kenya, Russia, Israel, Japan, etc.

"Quick response to market development, never give up the principle of quality, continuously dedicate in brand promotion, improve and innovate our products, provide customers with high quality products and service". Baowu (Shandong) Aluminum Co., Ltd. is sincerely looking forward to cooperating with you to create a beautiful tomorrow together.

Wuxi Tennied Metal Technology Co., Ltd is a professional supplier of Metal product products. The main products are carbon steel coil, stainless steel products and non-ferrous metals and so on. And can be customized production according to customer requirements.

Strict quality control system and perfect after-sales service system are always our top concern which can guarantee and track the quality of our products from raw materials procurement, production processes, finish products as well as after-sales service.

By Relying On Its Soled Financial Strength, Selecting Raw Materials, And Introducing Advanced Production Equipment And Mature Production Technology, Limit-Exceeding Company Can Produce High-Quality Products In Line With The National Standard GB, ASTM, DIN, JIS And Many Other Standards Or Technical Protocols.

Our Products Can Be Widely Applied To The Processing Industries Of Machinery, Construction, Home Decoration, Medicine And Other Fields, And The Company Can Customize Various Types Of Stainless Steel Tube Products In Accordance With Customer Needs. With Large Stainless Steel Tube Production Lines And Ultra-Large Storage Warehouses, The Company Strong Production Capacity Provides A Supply Volume Guarantee For Customers. Our products are widely used in catering kitchenware, medical equipment, household appliances, auto parts, construction and decoration and other fields. Our main market is distributed in Africa, Middle East, Southeast Asia, South America, etc. The company develops a corporate culture of "Quality First, Timely Delivery, Honest Cooperation, Perfect Service, and Common Development", and products that meet customer needs to increase production efficiency, improve cost control and resource management to achieve company value growth, and keep continuous innovation in the competition. Welcome all business partners to visit Tennied group and discuss cooperation.

Shenzhen Silver Technologies Ltd mainly acts as an agent, develops, produces and sells packaging tools and materials such as single crystal copper, copper alloy, key alloy wire, gold palladium copper wire, alloy wire, super-soft copper wire, packaged gold tape, pure aluminum wire, cleaver, steel nozzle, film, etc. At the same time, it can also tailor products with special parameters and requirements for enterprises.

Products of each project team:

1. High purity metal (pure platinum wire, pure gold particles, high purity silver wire, high purity single crystal copper)

2. Precious metal alloys (platinum iridium, platinum rhodium, gold and silver, gold and silver palladium, copper palladium, silver palladium, gold and tin alloys)

3. Copper alloy (silver copper alloy, tin copper alloy)

4. Stranded enameled wire (polyimide, polyurethane )

5. Semiconductor materials (key alloy belt, key alloy wire, gold palladium copper wire, pure aluminum wire, steel nozzle, cleaver)

6. Imported chips (Infineon, Ansemy, ST, TI)

Precious Metal Alloys

- Platinum Iridium: This alloy combines the durability and hardness of iridium with the corrosion resistance and other properties of platinum. It is used in high-temperature applications, electrical contacts, and precision instruments.

- Platinum Rhodium: With good catalytic properties and high-temperature resistance, it is used in catalytic converters, thermocouples, and other industrial applications.

- Gold and Silver: The combination of gold and silver alloys can offer a balance of properties such as conductivity, malleability, and aesthetic appeal, used in jewelry, electronics, and other industries.

- Gold and Silver Palladium: Palladium addition can improve the mechanical properties and corrosion resistance of the alloy, making it suitable for various applications in electronics and jewelry.

- Copper Palladium: This alloy may have enhanced electrical and mechanical properties, used in electrical connectors and other components.

- Silver Palladium: It can provide good conductivity and solderability, often used in electronic packaging and electrical contacts.

- Gold and Tin Alloys: Used in soldering and bonding applications, especially in semiconductor packaging due to their good wetting properties and reliability.

HengSheng Special Materials CO. Ltd located at PingXiang City, a Pearl City of JiangXi. The Superior location and convenient traffic. Our company have covered an area of 20 acres, and have invested almost 5 million yuan on Machine equipment.

Our company focus on Metal casting materials' invest and development, produces and sales, mainly service for customers from all over the world. Our company currently produce of aluminium oxide ceramic foam filter and with an annual output of 150, 000 pieces.

We can produce the ordinary foam filter plate, the specail shaped plate and the ceramic balls and the small size square shape and other customized products.

These are used on aluminum, water and air filtration and aquarium and so on.

And our company also have produce aluminium MID alloy with an annual output if 300, 000Ton.

Such as AlTi10/AlTo15, AlMn10/AlMn20, AlSi20/AlSi50, AlFe20, AlRe10, AlTi5B1 and so on.

The aluminum MID alloy used as additive.

Our company depend on automatic machine production, insist on high-quality and sincerely services, hope reach to double-win with our customers, we always insist on quality and safety as first, committed to building a world-class aluminum casting accessories enterprise.

Ningbo Huali Steel Co., Ltd. is a Stainless Steel Strip manufacturer. It was established in 2008, located in No. 666, Huang Ai Industrial Park, Dongqian Lake Tourist Resort, Ningbo City, Zhejiang Province, China. It was passed ISO9001. Successful foreign trading experience in Europe, North America and Asia.

The company has precision finishing mills, precision slitting machines and other equipment. The company mainly produces 201, 301, 304, 430 and other series of stainless steel strip products, and has more than 10 years of rich production experience. Our products are mainly used in pipe manufacturing, building materials, kitchen sinks/cutlery, bathrooms, elevators, automotive applications, industrial applications, hardware tools and more. Choose us, choose quality.

Why choose us?

1. With 10 years' experience in Stainless Steel strip manufacturing.

2. Competitive Price and Best Services.

3. Work with many famous brands, such as Tisco, Baosteel.

4. Strong production capacity.

5. Excellent exprience of after-sale service.

FAQ

Q: Are you Manufacturer or Trading company?

A: We are both manufacturer in Ningo city, Zhejiang Province, China. We have professional processing mill with 10 years' experience.

Q: What's your main products?

A: Our main products is including Stainless Steel Strip grade in 201, 301, 304, 304L, 316L, 430, 410L.

Q: Do you provide samples?

A3: Yes, we could offer the sample for free charge but the cost of freight is by receiver, normally.

Yantai Baodi Copper & Aluminum Co., Ltd. Was established in 1993 with the registered capital 20, 000, 000 Yuan, belongs to GOLDSUN Group which is a listing company. It is a company that specialize in producing, processing and selling aluminum and copper products; It is one of the largest companies which produce and sell aluminum and copper products in North China at present and a sole enterprise which can supply net scale specification according to costomer's inquirement. Our company is a professional non-ferrous metal company with the importing and exporting right.

Our main operating organizations: Production department, Technology and Quality department, Domestic sales department, International sales department, After-sales service department, Dalian branch company, Qingdao banch company, Weifang branch company.

Professional Processing: Our company own professional processing equipment such as roller, annealing stove, tension leverler, slitting machine, Extruder, Sheet shear machine, Plate sawing and cutting machine, Tube and bar sawing machine, Circle&triangle cutting machine, cover film machine etc.

Professional producing&selling:

Aluminum Series: Pure aluminum plate&sheet, aluminum alloy plate&sheet, duralumin plate, aluminum coil, aluminum tread plate, aluminum round rod, aluminum square bar, aluminum flat bar, aluminum pipe, aluminum profile for industry, special aluminum extrusion etc.

Copper series: Copper plate&sheet, copper strip, copper pipe, copper bar, copper wire, copper profile etc.

Perfect Service: Our company advocates enterprise culture idea as"the honest credit, the standard management, the technical service, the social contribution". We have maintained the friendly harmonious cooperation with the domestic and foreign partners for many years. Regarding the multi-varieties, the multi-specification's demand customer, our company also has the specialty to choose the material and the prompt allocation. Relied on 20 years development and the influence as well as the high-quality service, presently the domestic sale network of our company has covered Yantai, Qingdao, Dalian, Weihai, Weifang and Shandong, Liaoning, Jiangsu, Hebei, Tianjin as well as Northeast, North China, East China, and still stretch in other area. Our international service has also establish long-term, stable copperate relaship with countries in Europe, America, Southeast Asia, Middle East and Africa.

GOLDSUN GROUP includes several company: Goldsun New Energy Science&Technology Co., Ltd, Baodi Goldsun Photovoltaic electro-car Company etc, Yantai Baodi Copper&Aluminum Co., Ltd, Yantai Baodi Dalian Branch compay, Yantai Baodi Qingdao Branch company, Yantai Baodi Weifang Branch company and Yantai Baodigoldsun E-commerce Co., Ltd.

Chengdu Zhijin Machinery Equipment Co., Ltd. is located at Chengdu city, Sichuan province, China. We are dedicated to the manufacture of customized mechanical parts and hydraulic cylinders.

- Hydraulic cylinders. Capacity: BORE: 1.5" ~ 8.0"; ROD: 0.75" ~ 4.0" (Chromed, Nitro, IHCP); STROKE: 4.0" ~ 96"

- We have built up a complete supply chain from casting, forging, machining and fabrication processes. Our product lines cover areas of oil and gas, water works, fire protection, mining and construction, railway and railcar etc. 80% of our products are exported to more than 30 countries located in North and South America, European countries, Australia, and Asia. We supply not only comprehensive solutions of custom made parts, but also provide additional services like product design, process optimization, quality control and logistics.

- We work closely with our affiliated factories and strategic partner factories to supply global customers premium quality industrial machines and equipment such as wheel loader, crushing & Grinding machines, welding machines and automation equipment etc.

"Born in China, Raised by the world", we look forward to working with customers home and abroad to set up long term and win-win business.

Shandong zhishang steel company is specialized in steel products such as HR steel, CR steel, wire rod, GI steel, prepainted steel, stainless, Galvanized products, H-beam steel, steel tube, seam/seamless steel pipe Steel structure customization etc, which is China-calss professional, reliable and outstanding steel supplier.

And we have 20, 000 square meters of modern steel structure production workshops, supporting lifting cranes, forklifts, shearing machines, bending machines, drilling machines; H-beam production lines, CNC cutting machines, assembly machines, gantry welding, straightening machines, shot blasting machines, Paint spraying; Box girder production line, etc. It can provide high-quality, fast and flexible steel structure production and processing services for domestic and foreign customers at any time.

We are committed to providing customers with high-quality and low-price steel products and strives to create additional value for customers as its own responsibility, we have advanced galvanized production lines at guanxian county, liaocheng city and color coated production lines at boxing county, binzhou city, Shandong province with the annual production capacity of 1 million tons, also hold a monthly standing inventory of other steel products more than 50, 000 tons.

At the same time, we have professional logistics distribution system, which can provide best solution in shipment, our powerful production team can guarantee short time delivery. Our business covers Southeast Asia, the Middle East, Africa, Australia, Europe, the United States and other countries.

Zhishang culture:

Entrepreneurial spirit: Be prepared for danger in times of peace, actively forge ahead, unite and cooperate, and use it for hard work!

Corporate philosophy: People-oriented, rich employees, customer first, deep plowing service for development!

Enterprise goal: Strive to create an excellent enterprise in the industry! Benefit employees and give back to society!

Corporate Vision: Shoulder responsibility, long way to go

Zhishang team hopes to cooperate with all customers for win-win, common progress and common development!